mp-Labtronix Controller
The mp-Labtronix controller gives access to the full range of parameters to control Bartels micropumps. This is the perfect system for advanced testing, or if you are not familiar with electronics.
Includes a USB cable, and micropump connection cable.
General
The mp-Labtronix (formerly mp-x) controller is the most versatile system to test your Bartels micropumps. Adjust the amplitude (0 - 250 Vpp), frequency (0 - 300 Hz) and signal form (SRS, rectangular, sine) to get the desired flow rate or pressure.
This board is supplied via its USB connector, but can also be supplied with power from a 2.5 - 5 V voltage source.
- Dimensions: 7.5 x 16 x 20 cm (2.98 x 6.29 x 7.87 in.)
- Compatible with all mp6 pumps
- Adjustable parameters: amplitude (0 - 250 Vpp), frequency (0 - 300 Hz)
- User-friendly
Note: the mp-Labtronix can only control one micropump at a time.
Content
1x mp-Labtronix controller
Specifications
| Dimensions | 7.5 x 16 x 20 cm |
| Weight | 0.8 kg |
| Adjustable parameters | amplitude, frequency, signal form |
| Amplitude range | 0 - 250 V |
| Frequency range | 0 - 300 Hz |
| Signal form | SRS, rectangular, sine |
| Power supply | main adaptor |
| Current consumption | 750 mA at 7.5 V |
| USB port | 1 |
| Connectable micropumps | 1x mp6-liq, mp6-gas, mp6-gas+ |
Documentation
Find all Bartels datasheets, softwares and manuals here.
The mp-Labtronix controller gives access to the full range of parameters to control Bartels micropumps. This is the perfect system for advanced testing, or if you are not familiar with electronics.
Includes a USB cable, and micropump connection cable.
General
The mp-Labtronix (formerly mp-x) controller is the most versatile system to test your Bartels micropumps. Adjust the amplitude (0 - 250 Vpp), frequency (0 - 300 Hz) and signal form (SRS, rectangular, sine) to get the desired flow rate or pressure.
This board is supplied via its USB connector, but can also be supplied with power from a 2.5 - 5 V voltage source.
- Dimensions: 7.5 x 16 x 20 cm (2.98 x 6.29 x 7.87 in.)
- Compatible with all mp6 pumps
- Adjustable parameters: amplitude (0 - 250 Vpp), frequency (0 - 300 Hz)
- User-friendly
Note: the mp-Labtronix can only control one micropump at a time.
Content
1x mp-Labtronix controller
Specifications
| Dimensions | 7.5 x 16 x 20 cm |
| Weight | 0.8 kg |
| Adjustable parameters | amplitude, frequency, signal form |
| Amplitude range | 0 - 250 V |
| Frequency range | 0 - 300 Hz |
| Signal form | SRS, rectangular, sine |
| Power supply | main adaptor |
| Current consumption | 750 mA at 7.5 V |
| USB port | 1 |
| Connectable micropumps | 1x mp6-liq, mp6-gas, mp6-gas+ |
Documentation
Find all Bartels datasheets, softwares and manuals here.