-
Add to Cart The item has been added Bartels Mikrotechnik
BV 1101 Bistable Valve for Bartels MultiboardA shape-memory alloy valve from Memetis, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverM). General Memetis BV 1101 is a low-power 2/2 bistable valve, controllable...229.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-valvedriverM for Bartels MultiboardUse the mp-valvedriverM to control the Memetis BV 1101 valves from the Multiboard. General The mp-valvedriverM is a driver used to control Memetis BV 1101 valves on the Bartels Multiboard and...103.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
Honeywell ABP Pressure Sensor for Bartels MicropumpsHoneywell ABP digital pressure sensor with cable for Bartels Multiboard2. Pressure range from 0 to 15 psi (0 to 1 bar), accuracy of 0.25% (see documentation). General Honeywell ABP series are...129.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Driver Pump DriverBartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency,...70.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Multiboard2 Evaluation BoardThe mp-Multiboard2 evaluation board is the new version of the mp-Multiboard. Easily control your whole setup from the Multiboard2: up to six BP7 or mp6 Bartels micropumps, flow sensors, pressure...299.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels product line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver,...2,058.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mol Molex Connector for Bartels Micropumps (pack of 10)Molex connectors for custom-made cabling of Bartels BP7 and mp6 micropumps. Pack of 10 units. General Connect any BP7 or mp6 micropump to your control board with these Molex connectors. Content 10x...13.50€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mf Mounting Frame for Bartels MicropumpsA mounting frame for BP7 and mp6 micropumps. General Insert a BP7 or mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for Bartels...7.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-valvedriverT for Bartels MultiboardUse the mp-valvedriverT to control the Takasago SMV-2R-BN1F from the Multiboard or Multiboard2. General The mp-valvedriverT is a driver used to control Takasago SMV-2R-BN1F valves on the Bartels...103.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
SMV 2/2 NC Takasago Active Valve for Bartels MultiboardA shape-memory alloy valve from Takasago, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverT). General Takasago SMV is an almost-silent and low-power 2/2 normally closed...33.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-bt Bubble Trap for Bartels MicropumpsA bubble trap to remove bubbles from water-based solutions while using Bartels micropumps. General Remove bubbles from your flow stream using Bartels micropumps. The bubble trap must be used with a...50.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-t 1.3 mm Tygon Tubing for Bartels Micropumps (1 m)Compatible Tygon tubing for Bartels BP7 and mp6 micropumps. Tubing ID of 1.3 mm. General A transparent Tygon tubing of 1.3 mm x 3 mm (ID x OD), sterilizable by autoclave or EtO. Content 1x 1m Tygon...11.00€ -
Choose Options Bartels Mikrotechnik
SLF3x Liquid Flow Sensor for Bartels MicropumpsSensirion SLF3S-0600F and SLF3S-1300F liquid flow sensors are natively integrated with the Bartels environment. Just connect the sensor to the Multiboard2, and start monitoring your flow rate...250.00€ - 279.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-basic Evaluation SetThe mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set...1,029.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-cv Check Valve for Bartels MicropumpsA passive check valve to prevent backflows when your Bartels BP7 or mp6 micropump is switched off. General Prevent your liquid from flowing back when your Bartels BP7 or mp6 micropump is turned off...44.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-hc Hose Clamps for Bartels Micropumps (pack of 10)Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted...22.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-f Filter for Bartels MicropumpsProtect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels...61.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-damper for Bartels MicropumpsThe mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to...29.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels mp-Lowdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be easily adjustable...70.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver4 Pump DriverBartels mp-Highdriver4 is a multi-pump driver capable of controlling up to four BP7 or mp6 micropumps simultaneously. Pump parameters are easily adjustable (frequency, amplitude, signal shape) using...196.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver Pump DriverBartels mp-Highdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily...75.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Labtronix ControllerThe mp-Labtronix controller gives access to the full range of parameters to control Bartels micropumps. This is the perfect system for advanced testing, or if you are not familiar with electronics...1,135.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Lab! Evaluation SetThe mp-lab! evaluation set is the most versatile and powerful kit to try out Bartels micropumps. Including the mp-x laboratory controller, it is possible to change the frequency and amplitude of the...1,440.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
