Browse By Application

At Darwin Microfluidics, everything we do revolves around microfluidics.

We’ve built our expertise and our entire catalog around the specific needs of this field. Our team is made up of scientists and engineers who understand the constraints of working with small volumes, and our product selection reflects that.

If you’re working in microfluidics, you’re in the right place!

View More

Essentials Image

Worldwide Express Shipping

Worldwide Express Shipping

Delivery in 1-2 days for products in stock

Money-Back Guarantee

Simplified Purchasing

Pay by invoice or credit card

Outstanding Support

Outstanding Support

A team of engineers and PhDs ready to help!

456 Results

Add to Cart The item has been added

IDEX Health & Science
Super Flangeless Ferrule PEEK 1/4-28 for 1/16” OD (pack of 10)
Manufactured in PEEK, these Super Flangeless ferrules are adapted to 1/4-28 or M6 flat-bottom ports and are made to connect 1/16” OD tubing. Sold by packs of 10 ferrules. General Super Flangeless ferrules hold high-pressure holding in any 1/4-28 or M6...

Now: (Inc. Tax)

MSRP:

Was:

Now: 48.70€

MSRP:

Was:
Choose Options

microfluidic ChipShop
Male Mini Luer Fluid Connectors - Rows of four (pack of 10)
The Fluidic 333 Male Mini Luer Fluid Connectors by Microfluidic ChipShop are expertly designed to interface with four adjacent ChipShop mini Luer ports. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold by packs of 10 rows of four...

Now: (Inc. Tax)

MSRP:

Was:

Now: 19.00€

MSRP:

Was:
Choose Options

Masterflex
Male Luer Slip to Barb Adapters (pack of 10)
A pack of Luer Slip to Barb adapters in Polypropylene or Medical Nylon to connect any Luer Female port to a soft-walled tubing. Available in a pack of 10 units in Polypropylene or Medical Nylon, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or...

MSRP:

Now: 8.90€ - 9.70€

Was:
Choose Options

Masterflex
2-Stop PharMed BPT Pump Tubing (pack of 12)
PharMed® BPT tubing is specially designed to withstand a wide range of environments and temperatures. It has up to 10,000 hours of tubing life, is resistant to ozone and UV radiation, is noncytotoxic and nonhemolytic, making it an ideal choice for tissue...

Now: (Inc. Tax)

MSRP:

Was:

Now: 131.00€

MSRP:

Was:
Choose Options

microfluidic ChipShop
Particle & Cell Sorting Chip - Spiral Sorter - Mini Luer
The Fluidic 382 Sorting Chip by Microfluidic ChipShop enables reliable and accurate separation of particles with varying dimensions, featuring 4 variations of a main spiral design for diverse sorting effects. Mini Luer connections ensure leak-free inlet...

Now: (Inc. Tax)

MSRP:

Was:

Now: 42.20€

MSRP:

Was:
Choose Options

Emulseo
FluoSurf Nonionic Surfactant - Neat
FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of...

MSRP:

Now: 410.00€ - 415.00€

Was:
Choose Options

Masterflex
L/S PharMed BPT Pump Tubing (7.6 m)
Masterflex PharMed BPT tubing is ideal for tissue and cell applications. Biocompatible, it is opaque to UV and visible light for light-sensitive fluids. Compatible with any pump heads accepting L/S tubing, 7.6 m / 25 ft per roll. General Masterflex...

MSRP:

Now: 150.00€ - 306.00€

Was:
Choose Options

microfluidic ChipShop
Male Luer Plugs - Low Volume Displacement (pack of 10)
These Fluidic 1223 male Luer plugs are designed to seal female Luer ports on microfluidic chips. Sold in packs of 10 plugs. General These male Luer plugs close unused female Luer ports on your microfluidic chip. They are precisely designed to displace...

Now: (Inc. Tax)

MSRP:

Was:

Now: 19.00€

MSRP:

Was:
Choose Options

microfluidic ChipShop
ChipShop 1/32“ OD Capillary PEEK Tubing
This 1/32“ OD PEEK tubing from ChipShop is used to interface their microfluidic chips. Different lengths and dimensions are available. General This capillary PEEK tubing is suited for various applications to interface ChipShop chips. It can be used with...

MSRP:

Now: 58.40€ - 98.40€

Was:
Choose Options

microfluidic ChipShop
Droplet Generator Chip - Double Emulsion - Mini Luer
The Fluidic 1480 Double Emulsion Droplet Generator Chip by Microfluidic ChipShop is partially coated to enable W/O/W droplet-in-droplet generation. Mini Luer connections ensure leak-free inlet and outlet tubing junctions. Manufactured in...

Now: (Inc. Tax)

MSRP:

Was:

Now: 67.80€

MSRP:

Was:
Choose Options

Masterflex
Male Luer Lock to Barb Adapters (pack of 10)
A pack of Luer Lock to Barb adapters in Polypropylene or Medical Nylon to connect any Luer Female port to a soft-walled tubing. Available in a pack of 10 units in Polypropylene or Medical Nylon, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or...

MSRP:

Now: 9.70€ - 13.20€

Was:
Choose Options

Longer
L100-1F Intelligent Peristaltic Pump
This precise peristaltic pump covers a wide range of laboratory applications up to 266.7 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment. Various pump heads are available from 1 up to...

MSRP:

Now: 2,210.30€ - 2,453.70€

Was:
Choose Options

microfluidic ChipShop
Male Mini Luer Plugs - Rows of four (pack of 10)
These Fluidic 336 rows of mini Luer plugs are designed to block four successive unused ports on the ChipShop mini Luer-compatible chips. Sold in packs of 10 rows. General These rows of four male mini Luer plugs can block any adjacent female...

Now: (Inc. Tax)

MSRP:

Was:

Now: 19.00€

MSRP:

Was:
Choose Options

Masterflex
Masterflex T Barb Connectors
A pack of T connectors in polypropylene to connect your soft-walled tubes to the rest of your system. Available in a pack of 10 units (1/16", 3/32") or 25 units (1/8"), for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or 1/8" (3.2 mm). General A...

MSRP:

Now: 24.80€ - 62.00€

Was:
Add to Cart The item has been added

Bartels Mikrotechnik
mp-Highdriver Pump Driver
Bartels mp-Highdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard...

Now: (Inc. Tax)

MSRP:

Was:

Now: 72.00€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
Flangeless Ferrule ETFE 1/4"-28 for 3mm OD (pack of 10)
These Flangeless Ferrules are excellent for connecting most rigid or semi-rigid tubes, including tubing manufactured from fluoropolymers (FEP, PFA, ETFE, ECTFE, etc.), PEEK or stainless steel. General A set of Flangeless ferrules to hold any 3 mm OD...

Now: (Inc. Tax)

MSRP:

Was:

Now: 19.90€

MSRP:

Was:
Choose Options

ELVEFLOW
MFS Microfluidic Thermal Flow Sensor
These are professional and high-accuracy liquid mass flow sensors for ultra-low flow rate monitoring. We offer a full range of 6 microfluidic flow sensors from 7 nL/min to 40 mL/min to perfectly match your needs. The water-resistant version (IP54...

Now: (Inc. Tax)

MSRP:

Was:

Now: 2,028.00€

MSRP:

Was:
Add to Cart The item has been added

microfluidic ChipShop
Male Luer Tube Tuck Connectors for 1/32" OD Tubing (pack of 10)
The Fluidic 1580 Male Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/32" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop Luer chips. PEEK capillary tubing is recommended to withstand at least...

Now: (Inc. Tax)

MSRP:

Was:

Now: 25.00€

MSRP:

Was:
Choose Options

microfluidic ChipShop
Channel Interaction Chip - Mini Luer
The Fluidic 983 Channel Interaction Chip by Microfluidic ChipShop enables the assessment of molecules migrating between compartments under microfluidic flow. It features 5 independent channel designs with varying dimensions and includes 3 parallel...

Now: (Inc. Tax)

MSRP:

Was:

Now: 36.20€

MSRP:

Was:
Add to Cart The item has been added

Micronit
Ferrules 1/16" OD for Fluidic Connect Pro Chip Holder (pack of 5)
A pack of 5 ferrules to connect your 1/16" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro...

Now: (Inc. Tax)

MSRP:

Was:

Now: 129.00€

MSRP:

Was:
Choose Options

IDEX Health & Science
Manifold 9 Ports 1/4-28 PEEK
The manifold assembly is made in PEEK to provide excellent chemical resistance. Its 9 ports allow it to be used for splitting and merging applications. The Manifold Assembly comes with Super Flangeless fittings and ferrules for 1/16" OD or 1/8" OD tubing...

MSRP:

Now: 217.90€ - 220.00€

Was:
Add to Cart The item has been added

BFlow
BFlow Silicone Tubing
This flexible tubing allows the connection between your flow control system and microfluidic chips. It is autoclavable for compatibility with cell culture applications. General This flexible tubing can be used to connect microfluidic chips or...

Now: (Inc. Tax)

MSRP:

Was:

Now: 10.00€

MSRP:

Was:
Choose Options

Masterflex
L/S Tygon E-LFL Pump Tubing (7.6 m)
Masterflex Tygon E-LFL has the longest life of all Tygon formulations for peristaltic pumping. Compatible with any pump heads accepting L/S tubing, 7.6 m / 25 ft per roll. General Masterflex Tygon E-LFL tubing offers the longest pumping life of all Tygon...

MSRP:

Now: 128.00€ - 319.00€

Was:
Add to Cart The item has been added

Emulseo
Fluo-ST3 Hydrophobic Surface Treatment
The Fluo-ST3 surface treatment by Emulseo enhances the hydrophobicity of microfluidic chip channel walls, improving aqueous droplet performance and stability in fluorinated oils during droplet generation experiments. Supplied in a vial, volume of 8 mL...

Now: (Inc. Tax)

MSRP:

Was:

Now: 74.00€

MSRP:

Was:

1
2
3
4
5
6
7
8
9
10

Send Request Background

Got A Question?

Got a question or need a custom microfluidic solution? Our experts are here to help! Whether you're looking for prototyping, design consultation, or bulk manufacturing, we provide tailored solutions to fit your needs.

New Products

Pump cable for Bartels micropumps to Multiboard2 evaluation board — Add to Cart The item has been added

Bartels Mikrotechnik

Multiboard2 Cable for Bartels Micropumps

Connection cable to connect BP7 and mp6-series micropumps to the Multiboard2. General Connect 2x BP7 or mp6 micropumps to your Multiboard2 with this cable. Content 1x Connection cable for Multiboard2

17.00€

Image of IoT-Line Precision Balance KERN 572-39 — Add to Cart The item has been added

KERN

IoT-Line Precision Balance KERN 572-39

The IoT-Line Precision Balance KERN 572-39 is a highly accurate laboratory balance designed for various applications. It offers a maximum weighing capacity of 4200 g with a readability of 0.01 g. The...

775.00€

Bartels mp6 Micropumps - Darwin Microfluidics — Choose Options

Bartels Mikrotechnik

Bartels mp6 Micropump

Bartels mp6 series micropumps are a revolution in the field of microfluidics. Capable of transporting a very small quantity of liquid or gas, the micropumps of the mp6 series are...

52.00€

Microfluidic Reservoir for 15 mL Falcon Tube - S (2/4 port) - Darwin Microfluidics — Choose Options

ELVEFLOW

Microfluidic Reservoir for 15 mL Falcon Tube - S (2/4 ports)

This versatile autoclavable microfluidic adapter allows the use of (included) 15 mL BD Falcon tubes in microfluidic systems using standard 1/4-28 fittings interfaced with any pressure source to...

145.00€ - 165.00€

email subscription background

Get the latest updates on new products and upcoming sales

Trending Now

EXTENDO 944X

EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
EXTENDO 944X

EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
EXTENDO 944X

EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard