-
Choose Options IDEX Health & Science
Micro-Splitter ValveThe Micro-Splitter Valve made in PEEK has a 1/4-28 Flat-Bottom thread configuration. Included fittings accept 1/16" OD tubing. This assembly comes with 3x 1/4-28 Flangeless fittings (P-235). General The micro-splitter valve allows you to precisely split...130.90€ -
Choose Options microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane w/ Chamber Interaction - Mini LuerThe Fluidic 747 Organ-on-a-Chip by Microfluidic ChipShop is a budget-friendly and compact solution for simulating in vitro biological barriers. Each chip contains two culture chambers connected via their upper compartments, with both chambers featuring...79.50€ -
Add to Cart The item has been added PreSens
Polymer Optical FiberThe polymer optical fiber (POF) allows to transfer the excitation light to the sensor and the sensor response back to the meter in PreSens setups. This is ideal for non-invasive and non-destructive measurements of several parameters like pH, O2 and CO2...66.80€ -
Choose Options ISMATEC
3-Stop Chem-Durance Bio Pump Tubing (pack of 6)Chem-Durance® Bio tubing was designed specifically for advanced pumping systems, providing excellent chemical resistance and long operating life. Its low spallation rate ensures seamless pumping, while its plasticizer-free inner liner and high dielectric...153.00€ -
Choose Options ELVEFLOW
BFS Microfluidic Coriolis Mass Flow SensorThese mass flow sensors are based on the Coriolis principle which allows measuring the flow independently from the type of fluids (gases, water, oil, alcohol...). They are characterized by excellent precision over a wide range of flow rates from 1.6...5,450.00€ - 6,885.00€ -
Choose Options ISMATEC
Solva Extension Tubing (50 ft / 15.2 m)Solva™ tubing was designed to resist embrittlement and swelling due to hydrocarbon exposure, making it ideal for transporting hydrocarbons, petroleum products, and distillates. Its thermoplastic, PVC-based material and plasticizer offer a firm, stiff...77.00€ - 80.40€ -
Choose Options DK Infusetek
SPM/ZU-I Independent Syringe Pump (1-8 channels)High-precision split type syringe pump with one controller and separate syringe pumps (up to 8 units) for various lab applications from 0.01 µL/min to 127 mL/min. Embedding a 4.3" color LCD touch screen, the controller allows to independently...2,173.80€ - 10,827.10€ -
Choose Options Innofluid
HPM100 Low Flow Rate Peristaltic Pump for IncubatorThe new HPM100 peristaltic pump was designed to operate seamlessly at low flow rates within an incubator, allowing it to be positioned in close proximity to your sample or microfluidic chip. This pump can reach flow rates from 0.2 µL/min to 65...2,244.00€ - 2,695.50€ -
Add to Cart The item has been added BFlow
Male Luer to Barbed ConnectorUse this Luer lock connector to interface silicone tubing with your medium reservoir. General This male Luer Lock to barbed connector allows you to connect your silicone tubing with your medium reservoir via a needle. Sold in packs of 5, these...50.00€ -
Choose Options Droplet Genomics
Cell Barcoding Chip - PDMSThis microfluidic chip uses four liquid channels to deliver cells barcoding hydrogel beads, reagents, and oil to create a barcoded emulsion. 6 devices per chip, with 0.5 mm, 1 mm, or 1.2 mm punched holes to accommodate most tubing sizes. The design...188.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Fluid Connectors - Twins (pack of 10)The Fluidic 332 Twin Male Mini Luer Fluid Connectors by Microfluidic ChipShop are designed to seamlessly connect your tubings to adjacent ChipShop mini Luer ports. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold in packs of 10 twin...19.00€ -
Choose Options microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane w/ Open Chamber- Mini LuerThis open version of Fluidic 653 Organ-on-a-Chip features two distinct culture chambers, accessible via multiple inlets and outlets, allowing co-culture of various cell types within two separate compartments divided by a permeable membrane. It has an...103.30€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 275-315 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 275 to 315 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-basic Evaluation SetThe mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set contains the following: 1x mp-Multiboard2 controller with 4...999.00€ -
Choose Options New Era Pump Systems
NE-1002X SyringeONE:Microfluidics Programmable Syringe PumpThe NE-1002X SyringeONE:Microfluidics is one of the smoothest single-channel syringe pumps for microfluidics applications: in this low flow rate version, this syringe pump goes down to 0.13 pL/min with an accuracy of +/- 0.5%. The...1,704.60€ -
Choose Options DK Infusetek
SPC/ZU-I Independent Syringe Pump (1-8 channels)High-precision split type syringe pump with one controller and separate syringe pumps (up to 8 units) for various lab applications from 0.01 µL/min to 127 mL/min. Embedding a 7" color LCD touch screen, the controller allows to independently program...3,415.20€ - 12,068.60€ -
Choose Options ISMATEC
Tygon E-LFL Extension Tubing (100 ft / 30.4 m)Tygon® E-LFL tubing is the choice you can rely on when it comes to peristaltic pump applications. It offers longer tubing life compared to other Tygon® formulations, with a smooth inner bore. This tubing also has broad chemical compatibility and...240.00€ - 241.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect Pro ETFE Connection KitA kit containing 5x ferrules for 1/16" OD tubing and 5m ETFE tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...199.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female to 10-32 Male Flat-Bottom AdapterPEEK 1/4-28 female flat-bottom to 10-32 male flat-bottom adapter, to interface a 1/4-28 nut with a 10-32 port. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 flat-bottom port. Manufactured in PEEK for complete...34.60€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Super Flangeless Female Nut for 1/16” or 1/32” OD (pack of 10)This female 1/4-28 Super Flangeless nut connects 1/16" or 1/32" OD tubing to any male 1/4-28 fitting. Sold in packs of 10 units. General Easily adapt any tubing with these female 1/4-28 Super Flangeless nuts manufactured in PEEK. Associated with a Super...100.00€ -
Add to Cart The item has been added BFlow
Straight ConnectorThese connectors allow interfacing of silicone tubing with microfluidic chips. They are compatible with 1 mm ID tubing and 3 mm diameter punched holes. General These barbed straight connectors allow easy connection of soft-wall tubing directly with...50.00€ -
Choose Options ISMATEC
2-Stop Tygon E-Lab (E-3603) Pump Tubing (pack of 12)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth, non-aging and non-oxidizing inner bore prevents build-up of...114.00€ - 131.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels products line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver, Driver, Highdriver, and Highdriver4), 6x BP7...1,669.00€ -
Choose Options Darwin Microfluidics
PFA Tubing (20 m)PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of PTFE and FEP, with high transparency. Various sizes...113.00€ - 230.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
