AMC pump head for Innofluid peristaltic pumps, designed for low flow rates.
Available with 6 or 10 rollers and 1, 2, 3, 4, 5, 6, 8, 10, and 12 channels, with free silicone tubing included.
General
The new AMC pump heads are designed for low flow rates, ranging from 0.2 µL/min up to 65 mL/min, depending on the tubing size, and from 1 to 12 channels.
It can be mounted on LabV series pump drivers, with a maximum recommended motor speed of 150 rpm. The cartridges allow an easy change of the tubing, and occlusion can be finely adjusted on each cartridge for better performance.
Each pump head is available with 6 or 10 rollers: while reducing the maximum flow rate, 10 rollers allow lower flow rates and less pulsatility.
1 meter of 2*1 mm (2 mm ID x 4 mm OD) is included with each channel.
Pump head
Compatible tubing
Speed range
Flow rate (0.1-100 rpm)
AMC (6 rollers)
ID: 0.13 - 3 mm
Wall thickness: 0.8 - 1.0 mm
≤ 150 rpm
0.005 - 65 mL/min
AMC (10 rollers)
0.0002 - 48 mL/min
Content
1x AMC pump head
1x 1m of 2*1 (2 mm ID, 4 mm OD) 3-stop peristaltic tubing per channel
AMC pump head for Innofluid peristaltic pumps, designed for low flow rates.
Available with 6 or 10 rollers and 1, 2, 3, 4, 5, 6, 8, 10, and 12 channels, with free silicone tubing included.
General
The new AMC pump heads are designed for low flow rates, ranging from 0.2 µL/min up to 65 mL/min, depending on the tubing size, and from 1 to 12 channels.
It can be mounted on LabV series pump drivers, with a maximum recommended motor speed of 150 rpm. The cartridges allow an easy change of the tubing, and occlusion can be finely adjusted on each cartridge for better performance.
Each pump head is available with 6 or 10 rollers: while reducing the maximum flow rate, 10 rollers allow lower flow rates and less pulsatility.
1 meter of 2*1 mm (2 mm ID x 4 mm OD) is included with each channel.
Pump head
Compatible tubing
Speed range
Flow rate (0.1-100 rpm)
AMC (6 rollers)
ID: 0.13 - 3 mm
Wall thickness: 0.8 - 1.0 mm
≤ 150 rpm
0.005 - 65 mL/min
AMC (10 rollers)
0.0002 - 48 mL/min
Content
1x AMC pump head
1x 1m of 2*1 (2 mm ID, 4 mm OD) 3-stop peristaltic tubing per channel
short_descriptionAMC pump head for Innofluid peristaltic pumps, designed for low flow rates. Available with 6 or 10 rollers and 1, 2, 3, 4, 5, 6, 8, 10, and 12 channels, with free silicone tubing included.