DG Peristaltic Pump Head
DG pump head for Longer peristaltic pumps, designed for low flow rates.
Available with 6 or 10 rollers and 1, 2, 4, 6, 8, 12, 16, or 24 channels, free silicone tubing included.
General
DG series pump heads are designed for low flow rates (down to a few µL/min), from 1 to 24 channels.
Easily mountable on a compatible pump driver, the cartridges make it easy to change the tubing quickly. Occlusion can be adjusted on each cartridge with a ratchet wheel to fit different tubing sizes and get accurate results.
Each pump head is available with 6 or 10 rollers: while reducing the maximum flow rate, 10 rollers allow lower flow rates and less pulsatility.
2 meters of 1*1 mm (1 mm ID x 3 mm OD) and 2 meters of 2*1 mm (2 mm ID x 4 mm OD) included with each channel!
| Pump head | Compatible tubing | Speed range | Flow rate (0.1-100 rpm) |
| DG 6 rollers |
ID ≤ 3.17 mm Wall thickness 0.8-1.0 mm |
≤ 100 rpm | 0.0025-48 mL/min |
| DG 10 rollers | 0.002-32 mL/min |
Content
1x DG pump head
For each channel:
- 2x 1m of 1*1 mm 3-stop tubing
- 2x 1m of 2*1 mm 3-stop tubing
Specifications
Technical specifications
| Number of rollers | 6 | 10 |
| Max. flow rate (mL/min) | 48 | 32 |
| Max. speed (rpm) | 100 | |
| Rollers material | Stainless steel | |
| Cartridge material | POM | |
Tubing compatibility
| Tubing type | 3-stop peristaltic pump tubing |
| Max. ID (mm) | 3.17 |
| Min. wall thickness (mm) | 0.8 |
| Max. wall thickness (mm) | 1 |
Pump drives compatibility
| BT100-1L | DG-1 to DG-24 |
| BT100-3J | DG-1, DG-2 |
| G100-1J/G100-2J | DG-1 to DG-8 |
| L100-1E | DG-1, DG-2 |
| L100-1F | DG-1 to DG-8 |
| L100-1S | DG-1 to DG-8 |
Documentation
DG pump head for Longer peristaltic pumps, designed for low flow rates.
Available with 6 or 10 rollers and 1, 2, 4, 6, 8, 12, 16, or 24 channels, free silicone tubing included.
General
DG series pump heads are designed for low flow rates (down to a few µL/min), from 1 to 24 channels.
Easily mountable on a compatible pump driver, the cartridges make it easy to change the tubing quickly. Occlusion can be adjusted on each cartridge with a ratchet wheel to fit different tubing sizes and get accurate results.
Each pump head is available with 6 or 10 rollers: while reducing the maximum flow rate, 10 rollers allow lower flow rates and less pulsatility.
2 meters of 1*1 mm (1 mm ID x 3 mm OD) and 2 meters of 2*1 mm (2 mm ID x 4 mm OD) included with each channel!
| Pump head | Compatible tubing | Speed range | Flow rate (0.1-100 rpm) |
| DG 6 rollers |
ID ≤ 3.17 mm Wall thickness 0.8-1.0 mm |
≤ 100 rpm | 0.0025-48 mL/min |
| DG 10 rollers | 0.002-32 mL/min |
Content
1x DG pump head
For each channel:
- 2x 1m of 1*1 mm 3-stop tubing
- 2x 1m of 2*1 mm 3-stop tubing
Specifications
Technical specifications
| Number of rollers | 6 | 10 |
| Max. flow rate (mL/min) | 48 | 32 |
| Max. speed (rpm) | 100 | |
| Rollers material | Stainless steel | |
| Cartridge material | POM | |
Tubing compatibility
| Tubing type | 3-stop peristaltic pump tubing |
| Max. ID (mm) | 3.17 |
| Min. wall thickness (mm) | 0.8 |
| Max. wall thickness (mm) | 1 |
Pump drives compatibility
| BT100-1L | DG-1 to DG-24 |
| BT100-3J | DG-1, DG-2 |
| G100-1J/G100-2J | DG-1 to DG-8 |
| L100-1E | DG-1, DG-2 |
| L100-1F | DG-1 to DG-8 |
| L100-1S | DG-1 to DG-8 |