This mp-select Evaluation Set is the best way test Bartels micropumps while focusing on a specific flow rate range.
The set contains the following: 1x mp-Multiboard2 controller with 1 driver (Lowdriver, Driver, Highdriver or Highdriver4), 6x BP7 Tubing pumps, tubing, cables and connectors.
General
Try out Bartels micropumps smoothly with this evaluation set including their BP7 pumps, one pump driver and the mp-Multiboard2 controller, an integrated Arduino board enalbing an easy operation from the provided software.
BP7 Tubing micropumps are miniaturized double diaphragm pumps. Each micropump operates through two piezo actuators. Thanks to its space- and energy-efficient design, these pumps remain cost-effective even at high production volumes. The choice of materials makes the micropumps highly versatile, while adjustable flow rates ensure they can serve a wide range of applications. Based on your specific needs, you can select one of the following driver to be included in the kit:
- the Lowdriver to assess performances in the low flow rate range,
- the Driver for medium flow rates,
- the Highdriver for the highest flow rate range,
- the Highdriver4 to control up to 4 micropumps with high flow rates.
The software allows you to adjust the frequency and the voltage, and a timer mode for basic sequenced operation.
To complete the kit, the controller, the driver and the pumps come with 1.3 mm ID LMT-55 Tygon tubing and hose clamps to ensure a perfectly tight system.
Content
1x mp-Multiboard2 controller (with power supply, USB cable and micropump cables)
1x Driver (mp-Lowdriver, mp-Driver, mp-Highdriver or mp-Highdriver4)
6x BP7 Tubing micropumps
1x 1m 1.3 mm ID Tygon tubing
10x mp-hc hose clamps
Documentation
More information about each component can be found on their respective product page.
Click here to find all the datasheets, application notes, softwares and manuals for Bartels products.
Check the chemical compatibilities for the tubing here: Tygon LMT-55 - Chemical Compatibility Chart.
