Press Fit Tubing Connectors (pack of 20)
Simply connect your Grace Bio-Labs chamber to pumps or other devices for microfluidic applications. A leak-proof seal is created by pressing the adhesive-coated connector against the filling port of the chamber.
20 units per pack.
General
These Press Fit connectors from Grace Bio-Labs are made to securely connect their chambers to rigid tubing without any tools needed.
- Affordable and easy to use
- Adhesive-coated surface: simple installation by pressing the connector to the filling ports on the chamber surface
- Leak-proof seal, tight connection for microfluidic applications
- Diameter of 6.35 mm diameter, connection hole of 0.56 mm diameter
- Made in clear silicone
The outer diameter of the tubing used can range from 0.8 mm up to 1.2 mm.
Tip: To work in the best conditions, make the connection with semi-rigid tubing (PTFE, PEEK, FEP...) and not flexible tubing (silicone, Tygon...). Indeed, flexible tubing will shrink when being inserted. Alternatively, you can insert a needle of the same outer diameter range (0.8 mm - 1.2 mm) in the connector, and connect a flexible tubing to it.
Content
20x Press Fit tube connectors
Specifications
| Material | Clear silicone |
| Diameter | 6.35 mm |
| Connection hole diameter | 0.56 mm |
| Accepted tubing OD | 0.8-1.2 mm (rigid tubing only) |
Documentation
The following video demonstrates the use of tubing connectors with HybriWells for loading reagents and for perfusion applications.
Simply connect your Grace Bio-Labs chamber to pumps or other devices for microfluidic applications. A leak-proof seal is created by pressing the adhesive-coated connector against the filling port of the chamber.
20 units per pack.
General
These Press Fit connectors from Grace Bio-Labs are made to securely connect their chambers to rigid tubing without any tools needed.
- Affordable and easy to use
- Adhesive-coated surface: simple installation by pressing the connector to the filling ports on the chamber surface
- Leak-proof seal, tight connection for microfluidic applications
- Diameter of 6.35 mm diameter, connection hole of 0.56 mm diameter
- Made in clear silicone
The outer diameter of the tubing used can range from 0.8 mm up to 1.2 mm.
Tip: To work in the best conditions, make the connection with semi-rigid tubing (PTFE, PEEK, FEP...) and not flexible tubing (silicone, Tygon...). Indeed, flexible tubing will shrink when being inserted. Alternatively, you can insert a needle of the same outer diameter range (0.8 mm - 1.2 mm) in the connector, and connect a flexible tubing to it.
Content
20x Press Fit tube connectors
Specifications
| Material | Clear silicone |
| Diameter | 6.35 mm |
| Connection hole diameter | 0.56 mm |
| Accepted tubing OD | 0.8-1.2 mm (rigid tubing only) |
Documentation
The following video demonstrates the use of tubing connectors with HybriWells for loading reagents and for perfusion applications.