The SLF3C-1300F Liquid Flow Sensor combines exceptional price-performance with high-precision flow measurement, supporting flow rates from 0 to 40 mL/min. It features a rapid response time of less than 20 ms, sensitivity down to 0.05 mL/min, and integrated thermal conductivity detection, making it an ideal solution for flow monitoring, fluid analysis, and more.
General
Based on Sensirion's proven CMOSens® technology, the new SLF3x sensor series is the result of Sensirion latest product developments. Its simpler design reduces the cost of this sensor, without compromising its performance. Flow rate is measured through the wall of a straight flow channel, with inert wetted materials for an outstanding chemical resistance.
The SLF3C-1300F also features integrated thermal conductivity measurements, making it highly versatile for applications that require simultaneous flow and fluid analysis, such as concentration measurements or liquid differentiation. Additionally, it can detect air bubbles in the flow.
It is calibrated for water and IPA.
Find a comprehensive kit including this sensor and accessories for standalone operation in the SLF3C-1300F Flow Sensor Evaluation Kit.
Content
1x SLF3C-1300F Sensirion liquid flow sensor with thermal conductivity feature
Cable not included, software available for standalone operation.
Specifications
| Flow range (water) |
0 - 40 mL/min |
|
Accuracy (water)
(whichever error is larger)
|
+/- 5% of measured value
0.05 mL/min
|
|
Repeatability (water)
(whichever error is larger)
|
+/- 0.5% of measured value
0.01 mL/min
|
| Connection |
1/4-28 UNF |
Further specifications and values for IPA can be found in the datasheets.
Additionally, this sensor offers the following advantages:
- Dimensions: 48 x 15.5 x 8.9 mm
- Highly integrated: Linearized, temperature-compensated, and fully calibrated digital output signal (I2C) from a single chip
- Wide flow range to cover flow rates from µL/min to mL/min
- Easy fluidic connection through 1/4-28 UNF ports
- Thermal Conductivity feature enables measurement of concentrations or distinguishing between different liquids after calibration.
- Air-in-line detection thanks to the thermal measurement principle
- Fast response time down to 20 ms
- Bidirectional measurement and real-time failure detection
- Wetted materials: Polyphenylene sulfide (PPS), stainless steel 316L, epoxy-based adhesive
- Max. operating pressure: 12 bar
Documentation
Sensirion SLF3C-1300F liquid flow sensor datasheet
Application Note for the SLF3C-1300F Thermal Conductivity Measurement
