-
Add to Cart The item has been added IDEX Health & Science
1/4-28 VacuTight Fitting for 1/16” OD (pack of 10)VacuTight 1/4-28 fittings to maintain 1/16" OD tubing under vacuum and low pressure. Sold by packs of 10 units. General These VacuTight fittings strongly hold 1/16" OD rigid tubing into 1/4-28 female ports. They provide airtight and dependable...122.10€ -
Add to Cart The item has been added Emulseo
Fluo-Break Emulsion BreakerThe Fluo-Break solution is an emulsion breaker from Emulseo. It is specifically developed to disrupt droplets that were stabilized with FluoSurf. Supplied in a glass vial of 10 mL. General The emulsion breaker Fluo-Break from Emulseo is a clear...155.00€ -
Add to Cart The item has been added IDEX Health & Science
Ferrule 10-32 Coned for NanoPort (pack of 10)Ferrules in ETFE for 1/16" OD tubing. Use these ferrules with the NanoPort assemblies. Sold in packs of 10 units. General Connect your 1/16" OD rigid tubing to your chip through the NanoPort assembly, using this ETFE ferrule. Content 10x ETFE ferrule...63.60€ -
Add to Cart The item has been added IDEX Health & Science
One-Piece Fingertight 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)One-piece fittings combine a nut and a ferrule built into one fitting, so you never lose the ferrule or stuck it in the receiving port. These Fingertight fittings manufactured in PEEK are designed to easily connect a 1/16" OD tubing to 10-32 coned ports...91.30€ -
Choose Options Memetis
Normally Closed 2/2 MicrovalvesMemetis Normally Closed microvalves are designed for microfluidics: ultra-compact (total footprint of 20 mm) with an internal volume of less than 6.5 µL, they can easily be integrated into your lab-on-chip. The valves are either controllable with...99.00€ -
Choose Options IDEX Health & Science
360 µm OD PEEK Capillary TubingThis 360 µm OD capillary PEEK tubing is highly resistant, biocompatible, and chemically inert. Available in 4 different inner diameters. General PEEK tubing is compatible with aggressive solvents and resists a wide temperature range, from -50°C up to...70.90€ - 72.30€ -
Choose Options IDEX Health & Science
Fittings Adapter Male Luer to Male 1/4"-28 thread (pack of 10)Connect any female Luer element to female 1/4-28 with these Luer Lock adapters. Available in packs of 10 units. General Interface a Luer port with any 1/4-28 flat-bottom thread. Manufactured in Polypropylene or Delrin. Content 10x Male Luer to male...45.00€ - 49.20€ -
Choose Options Eden Tech
Flexdym Starter Pack - An Alternative to PDMSDiscover this brand-new biocompatible polymer with this starter pack! The Flexdym is an excellent alternative to PDMS for microfluidic applications: self-sealing, resistant, cost-effective, and biocompatible: it will significantly ease your work when...360.00€ -
Choose Options KemLab
SQ Negative Epoxy Photoresist for MicrofluidicsSQ™ is a negative tone epoxy photoresist specifically formulated for microfluidics and PDMS molding. Sensitive to Near-UV, i-line and broadband wavelengths, it is a great alternative to SU8. SQ™ uses superior epoxies, now adapted to...129.50€ - 11,301.00€ -
Choose Options Bürkert
2/2 or 3/2 Way Rocker Valve Type 0127A microfluidic rocker valve combines low internal volume with minimal dead volume, for less unused fluid and a reduced chance of contamination. A PEEK body, FFKM seal, and separating diaphragm between the fluid and actuator gives maximum chemical...137.00€ - 153.00€ -
Choose Options Droplet Genomics
Flow Focusing Droplet Generator - PDMSThese microfluidic chips are based on a flow-focusing design to generate monodisperse emulsions, with one oil inlet, one water inlet, and one outlet. 6 devices per chip, with 0.5 mm, 1 mm, or 1.2 mm punched holes to accommodate most tubing sizes. The...188.00€ -
Choose Options Innofluid
LabV1 Intelligent Low Flow Rate Peristaltic PumpFlow rate peristaltic pump with 4.3" LCD touch screen with dispensing and fixed volume modes. Made in laboratory-grade ABS, this pump is easy to use and can reach flow rates down to a few µL/min at a very competitive price! Available with the new...1,104.20€ - 1,737.00€ -
Choose Options microfluidic ChipShop
Sorting and Flow Focusing Chip - Various channel dimensions Fluidic 386The Fluidic 386 Chip by Microfluidic ChipShop is designed for particle and cell sorting using a sheath flow on the sample stream. Available in PMMA or COP (Zeonor). General ChipShop chips are convenient, cost-effective, and reliable for all your...42.20€ -
Sale
Choose Options Sensirion
LG16 Liquid Flow SensorSensirion LG16 liquid flow sensor is a high-precision solution to accurately measure very low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40 ms, and sensitivity down to < 0.02 µL/min make it the...440.00€ - 670.00€ -
Choose Options New Era Pump Systems
NE-1010 SyringeONE:100 High Pressure Programmable Syringe PumpThe NE-1010 SyringeONE:100 is a single-channel programmable syringe pump for a wide range of applications. In this High-Pressure version, the SyringeONE:100 has a stronger motor than the standard SyringeONE, which can generate flow...1,030.60€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned to 1/4-28 PEEK AdapterThe threaded adapter assembly made in biocompatible PEEK is perfect to connect different threads. Its configuration allows a perfect connection between a female 10-32 coned to female 1/4-28 flat-bottom. Included fitting accepts 1/16" OD tubing...39.30€ -
Add to Cart The item has been added IDEX Health & Science
6-40 Flat-bottom Nut (pack of 10)This Headless Super Flangeless 6-40 Nut is designed to interface a 1/16"OD tubing to a 6-40 flat-bottom port. Use it to eliminate loosening of fittings due to tube twisting. The nut holds tight even during vibration and delivers the highest pressure...57.60€ -
Choose Options Darwin Microfluidics
Silicon Wafers for Soft-Lithography (pack of 25)Silicon wafers are widely used for soft-lithography processes and PDMS molding. One side mirror polished, 525 µm thickness, 3 diameters available: 100 mm (4"), 76.2 mm (3"), 50.8 mm (2"). General Our team has chosen the best wafer specifications for soft...288.00€ - 455.00€ -
Choose Options microfluidic ChipShop
Female Mini Luer Caps (pack of 10)These Fluidic 1262 caps preserve female Mini Luer interfaces from evaporation and contamination. Sold in packs of 10 caps. General These polypropylene (PP) caps allow sealing Mini Luer interfaces with a small footprint. Their shape eases handling and...19.00€ -
Add to Cart The item has been added microfluidic ChipShop
Female Mini Luer Flat Caps (pack of 10)These Fluidic 1230 flat caps seal female Mini Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Mini Luer interfaces with a minimal footprint. Content 10x Female mini Luer flat caps Specifications Documentation ? Female...19.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Fittings 10-32 Kit for 1/16" OD TubingA kit of PEEK fittings for connecting 1/16" OD rigid tubing with 10-32 threaded ports. These fittings are reusable and can be used for the distribution of both liquids and pneumatic pressure (i.e. from a pressure source). General Connect 1/16″ OD rigid...119.00€ -
Choose Options Little Things Factory
T-27 Multi-size Droplet Generator - Glass ChipMicrofluidic droplet generators are useful tools for generating highly reproducible micro-sized droplets. These chips ensure single droplet production in a wide size range with high precision and accuracy. Glass chips are hydrophilic, making it easy to...130.00€ - 395.00€ -
Choose Options Sensirion
SLF3S-0600F Flow Sensor Evaluation KitThe SLF3S-0600F Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-0600F sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Add to Cart The item has been added IDEX Health & Science
VacuTight Ferrule 1/4-28 for 1/16” OD (pack of 10)VacuTight 1/4-28 ferrules to maintain 1/16" OD tubing through vacuum and low-pressure conditions. Sold in packs of 10 ferrules. General These VacuTight ferrules are to be combined with VacuTight nuts to strongly hold 1/16" OD rigid tubing into 1/4-28...18.80€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
