-
Choose Options Bartels Mikrotechnik
Bartels mp6 MicropumpBartels mp6 series micropumps are a revolution in the field of microfluidics. Capable of transporting a very small quantity of liquid or gas, the micropumps of the mp6 series are characterised by the combination of 2 piezo actuators in a...52.00€ -
Choose Options Bartels Mikrotechnik
Bartels BP7 MicropumpBartels BP7 micropump is a piezoelectric pump designed for handling liquids or gases in a wide range of applications. Ultra-compact and lightweight, it integrates easily into your microfluidic system. The BP7 is an improved version of the mp6, for more...55.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver4 Pump DriverBartels mp-Highdriver4 is a multi-pump driver capable of controlling up to four BP7 or mp6 micropumps simultaneously. Pump parameters are easily adjustable (frequency, amplitude, signal shape) using the mp-Multiboard evaluation board. General Take...190.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
SMV 2/2 NC Takasago Active Valve for Bartels MultiboardA shape-memory alloy valve from Takasago, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverT). General Takasago SMV is an almost-silent and low-power 2/2 normally closed valve, controllable through the Bartels Multiboard2...32.00€ -
Choose Options New Era
NE-300 InfusionONE Syringe PumpThe New Era NE-300 InfusionOne is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics. Flow range from 12.2 nL/min up to 20.95 mL/min, +/- 1% accuracy. General No withdrawal,...380.00€ -
Choose Options Longer
External Control Module for Longer PumpsControl your Longer peristaltic pump externally, in voltage, current, frequency, or RS485. Compatible with most Longer pump drivers, the following modules are available: 0-5 V, 0-10 V, 4-20 mA, 0-10 kHz, RS485. General Standard external control...24.60€ - 29.30€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels mp-Lowdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be easily adjustable (frequency and amplitude), using the mp-Multiboard evaluation...67.00€ -
Choose Options Longer
BT100-1L Multichannel (4-24) Peristaltic PumpA precision peristaltic pump with 4 up to 24 parallel channels from 2 µL/min. A graphic LCD screen displays either rpm or flow and facilitates quick and easy control of the pump. Silicone tubing is included with each pump channel. General This...1,565.70€ - 2,752.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mf Mounting Frame for Bartels MicropumpsA mounting frame for BP7 and mp6 micropumps. General Insert a BP7 or mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for Bartels micropumps Specifications Dimensions 33 x 18 x 4...6.50€ -
Choose Options New Era
NE-1000 SyringeONE Programmable Syringe PumpThe NE-1000 New Era SyringeOne is a single-channel programmable syringe pump for a wide range of applications: in its standard version, the SyringeONE can generate flow rates typically between 12.12 nL/min to 28.31 mL/min. The SyringeONE pump is fully...884.90€ -
Choose Options Longer
L100-1F Intelligent Peristaltic PumpThis precise peristaltic pump covers a wide range of laboratory applications up to 266.7 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment. Various pump heads are available from 1 up to...2,210.30€ - 2,453.70€ -
Choose Options New Era
NE-4000 SyringeTWO Programmable Syringe PumpThe NE-4000 SyringeTWO is a two-channel programmable syringe pump for a wide range of applications: the SyringeTWO can generate flow rates typically from 23.9 nL/min to 100.3 mL/min. The SyringeTWO pump is fully programmable standalone or through a...1,161.70€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver Pump DriverBartels mp-Highdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard...72.00€ -
Choose Options Longer
BT100-3J Basic Peristaltic PumpA laboratory peristaltic pump to cover a wide range of applications, from 2 µL/min to 366.7 mL/min. This is the updated version of the BT100-2J. You can choose between two pump head types depending on the required flow rate. Silicone tubing...723.40€ - 966.90€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Multiboard2 Evaluation BoardThe mp-Multiboard2 evaluation board is the new version of the mp-Multiboard. Easily control your whole setup from the Multiboard2: up to six BP7 or mp6 Bartels micropumps, flow sensors, pressure sensors, valves, etc. The user-friendly Multiboard Windows...299.00€ -
Choose Options Masterflex
L/S Easy-Load II Pump HeadThe Easy-Load II pump head is an upgraded version of the standard Easy-Load pump head. It can reach higher flow rates and offers both open-head sensor and adjustable occlusion options. Up to 4 pump heads can be stacked on one compatible pump drive. Flow...520.00€ - 824.00€ -
Choose Options New Era
NE-1010 SyringeONE:100 High Pressure Programmable Syringe PumpThe NE-1010 SyringeONE:100 is a single-channel programmable syringe pump for a wide range of applications. In this High-Pressure version, the SyringeONE:100 has a stronger motor than the standard SyringeONE, which can generate flow rates up to 208.3...1,004.30€ -
Choose Options Innofluid
LabV1 Intelligent Low Flow Rate Peristaltic PumpFlow rate peristaltic pump with 4.3" LCD touch screen with dispensing and fixed volume modes. Made in laboratory-grade ABS, this pump is easy to use and can reach flow rates down to a few µL/min at a very competitive price! Available with the new...1,104.20€ - 1,737.00€ -
Choose Options New Era
SyringeONE OEM Syringe PumpThe OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options available for low flow rates or high pressure, with...564.60€ - 1,221.40€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Driver Pump DriverBartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2...67.00€ -
Choose Options ISMATEC
Reglo ICC (Independent Channel Control) PumpControl independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and calibrate. The independent channel calibration ensures high...3,450.00€ - 5,570.00€ -
Choose Options New Era
NE-1600 SyringeSIX Programmable Multichannel Syringe PumpThe NE-1600 SyringeSIX is a 6-channel syringe pump designed for a wide range of applications: programmable standalone or through a computer, the SyringeSIX can hold multiple syringes to generate flow rates from 7.53 nL/min up to 19.38 mL/min. General The...1,704.60€ -
Choose Options New Era
New Era Syringe Heater KitHeat your syringes and control their temperature up to 185 °C! This kit includes a control unit and a primary syringe heater pad to heat one syringe. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General A...433.20€ -
Choose Options Memetis
Normally Closed 2/2 MicrovalvesMemetis Normally Closed microvalves are designed for microfluidics: ultra-compact (total footprint of 20 mm) with an internal volume of less than 6.5 µL, they can easily be integrated into your lab-on-chip. The valves are either controllable with your...99.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
