L/S Reduced-Pulsation Multichannel Cartridge Pump Head
- Product SKU: MF-07519-10
- Category: Masterflex, Peristaltic Pump Heads, Peristaltic pumps, Pumps & Flow Controllers
The upgrade of the standard Cartridge pump head is designed for high-precision synchronous multichannel pumping up to 12 channels. Compatible with most L/S drives.
It delivers a flow rate from 0.00005 to 350 mL/min depending on the head type and tubing size.
Masterflex L/S Reduced-Pulsation Cartridge pump head
The Reduced-Pulsation Cartridge pump head offers synchronous multichannel pumping over a wide range of flow rates.
- Precision molded housing
- Fast tubing changes: cartridge snap in and out easily
- 6 or 8 rollers for reduced pulsation and lower flow rates
- 1 up to 12 cartridges: 6-roller version accepts 2 or 6 large cartridges, 8-roller version accepts 4 or 12 small cartridges
- From 0.00005 to 350 mL/min and up to 600 rpm depending on the pump drive
- Adjustable occlusion optimized for each tubing size
- Compatible with 2-stop microbore or Masterflex L/S tubing
Tip: to further reduce the pulsation, cartridges can be mounted in opposite directions to balance their offset occlusion. Just connect the two tubes with a Y-connector to get the resulting flow.
Cartridge
Manufactured in polycarbonate and glass-filled nylon, the cartridges do not need any tool to be loaded on the pump head. Their occlusion “wedge” design provides accurate and more balanced flow control.
The 6-roller pump head supports 2 or 6 large cartridges, while the 8-roller pump head supports 4 or 12 small cartridges.
Compatibility:
- Small cartridge: all 2-stop microbore
- Large cartridge: Masterflex L/S 14, 16, 25, 17
See tubing recommendations in the "Specifications" tab.
Cartridges must be purchased separately.
1x Masterflex Reduced-Pulsation Cartridge pump head (without cartridges)
07519-10 | 07519-15 | 07519-20 | 07519-25 | |
Flow range | 0.00005 to 350 mL/min | |||
Max rpm | 250 | 600 | 250 | 600 |
Number of rollers | 6 | 6 | 8 | 8 |
Housing material | Polysulfone ends | |||
Rotor/roller material | Stainless steel / Rulon | |||
Operating temperature | 0 to 40 °C (32 to 104 °F) | |||
Weight | 2.1 kg (4.5 lb) |
Tygon E-Food and Viton (L/S sizes) are not recommended with Cartridge pump heads.
Flow range & tubing
The following tables give the expected flow range depending on the pump head for a few 2-stop microbore and L/S tubing dimensions. Values are given in mL/min.
Rollers | Max number of cartridges | Drive rpm | 0.19 mm ID | 0.89 mm ID | 2.79 mm ID | |
07519-20 | 8 | 4 small |
6 to 250 0.1 to 100 |
0.017 to 0.70 0.003 to 0.28 |
0.31 to 13 0.005 to 5.2 |
2.0 to 85 0.034 to 34 |
07519-25 | 8 | 12 small |
6 to 600 0.1 to 100 |
0.003 to 0.3 0.00005 to 0.05 |
0.062 to 6.2 0.001 to 1.0 |
0.41 to 41 0.007 to 6.8 |
Rollers | Max number of cartridges | Drive rpm | L/S 14 | L/S 16 | L/S 25 | L/S 17* | |
07519-10 | 6 | 2 large |
6 to 250 0.1 to 100 |
0.94 to 39 0.016 to 16 |
3.1 to 130 0.052 to 52 |
5.8 to 240 0.096 to 96 |
8.4 to 350 0.14 to 140 |
07519-15 | 6 | 6 large |
6 to 600 0.1 to 100 |
0.20 to 20 0.003 to 3.3 |
0.65 to 65 0.011 to 11 |
1.2 to 120 0.020 to 20 |
1.7 to 170 0.028 to 28 |
*Only silicone and C-FLEX formulations are recommended for L/S 17.
Payment Terms
You can either order and pay via credit card or invoice (through a purchase order). Request a quote easily by clicking on the "Request a Quote" button in the cart page.
Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
Credit card
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
Invoice
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD, GBP or AUD, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
Worldwide shipping
We ship worldwide from our warehouse in France.
Shipping charges are calculated based on the shipping country, and can be estimated from the cart page. Our shipping rates and times are:
- France: GLS (1-2 business days), free shipping above 350€
- Germany, Austria, Belgium, Denmark, Spain, Hungary, Italy, Luxembourg, Netherlands, Poland, Portugal, Czechia, Slovakia:
- GLS (2-4 business days), free shipping above 350€
- DHL Express (1-2 business days), reduced rate above 350€
- Bulgaria, Croatia, Estonia, Finland, Ireland, Latvia, Lithuania, Romania, Slovenia, Sweden, Greece, Cyprus, Malta: DHL Express (1-2 business days), free shipping above 400€
- United Kingdom: DHL Express (1-2 business days), free shipping above 400€
- USA, Canada: DHL Express (1-3 business days), free shipping above 400€
- Switzerland: DHL Express (1-2 days), free shipping above 450€
- Other countries: DHL Express, shipping rates based on the destination, weight and dimensions
If you wish to use your own shipping account, we will charge a flat fee of 15€.
We reserve the right to apply a surcharge for parcels > 30 kg, palletized shipments, or packages with dimensions exceeding the maximum dimensions of our carriers.
Please note that our standard shipping incoterms are DAP (Delivered At Place), or EXW if using your own carrier.
Contact us if you have any questions!