The mp-lab! evaluation set is the most versatile and powerful kit to try out Bartels micropumps. Including the mp-x laboratory controller, it is possible to change the frequency and amplitude of the pumps without any limitation.
The set contains the following: 1x mp-Labtronix controller, 6x BP7 pumps, tubing and connectors.
General
Try out Bartels micropumps comfortably with this evaluation set including the mp-x controller, a laboratory system to get a complete control over the frequency, amplitude and signal shape. Use the knobs and toggle switches to set your values and get the desired flow rate and/or pressure.
This set is also a good solution if you are not familiar with electronics, or need to do intensive tests.
6x BP7 micropumps are supplied together with Tygon tubing and hose clamps. In this kit, you will also receive a USB cable for connection to your PC and a power supply.
Content
1x mp-Labtronix controller (with power supply and USB cable)
6x BP7 tubing micropumps
1x BP7 tubing-con connection cable from micropump to mp-Labtronix
1x 1 meter 1.3 mm ID Tygon tubing: compatible with the micropump barb connectors
10x mp-hc hose clamps
Documentation
More information about each component can be found on their respective product page.
Click here to find all the datasheets, application notes, softwares and manuals for Bartels products
Check the chemical compatibilities for the Tygon tubing here: Tygon LMT-55 - Chemical Compatibility Chart
