MFS Microfluidic Thermal Flow Sensor
These are professional and high accuracy liquid mass flow sensors for ultra low flow rate monitoring. We offer a full range of 5 microfluidic flow sensors from 0.07 µL/min to 5,000 µL/min to perfectly match with your needs.
Five different microfluidic sensors are available depending on the flow range you want to achieve (from 0.07 to 5000 μL/min). Performances, resolution and precision are adapted to experiments in microfluidics that require high accuracy.
The flow sensor shows bi-directional and linear transfer characteristics.
The product comes fully calibrated for water. The MFS Thermal Flow Sensor can work in digital mode and it needs to be connected to the specific Sensor Reader (click here for more information). The Sensor Reader is sold separately and can manage up to 4 different sensors at the same time. Thanks to the integrated software you will able to record, storage and analyse the data gathered by the sensor directly on your computer.
|Sensor - Flow rate range||
|Resolution||down to 1.5 pL/sec|
|Measurements||Bi-directional (positive and negative flow rates)|
|Sensor response time||40 ms|
|Low dead volume||< 1 µL|
|High chemical resistance||The interior channel is made in PEEK and it is bio-compatible|
|Ease to use||The sensor has not influence on the flow rate of the liquid passing through|
|Operating temperature||+10 °C to +50 °C|
|Electrical input||8 V; 100 mA|
|Output||Digital only (with a Sensor Reader or OB1 Mk3+ controller)
A calorimetric thermal low-flow liquid flow meter measures the asymmetry of a temperature profile modulated by the fluid flow by using 2 different heat sensors surrounding a central heating element.
Create your complete microfluidic setup with the MFS Thermal Flow Sensor and the Sensor Reader. They are both compatible with several flow control instruments (syringe pump, peristaltic pump and pressure controllers). Our dedicated software and its user friendly interface allow you to control the data acquisition directly on your pc.
You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at firstname.lastname@example.org
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
We ship worldwide from our warehouse in France.
The shipping charges are calculated based on the weight of the package and the country of destination: you can estimate the shipping cost on the cart page. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination!
Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!