L/S Multichannel Pump Head for Microbore Tubing
The Multichannel pump head for microbore tubing delivers low-pulsation synchronous flow from 0.00005 to 200 mL/min. Its robust construction in aluminum and stainless steel makes it durable and suitable for continuous-duty operation.
Stack multiple pump heads up to 32 channels on the same drive.
General
Masterflex Multichannel pump head
The Multichannel pump head offers low-pulsation synchronous multichannel pumping without cartridges. Its robust housing in anodized aluminum and stainless steel makes it the ideal head when reliability is needed for multichannel applications.
- Stackable pump heads up to 32 channels
- Flow rate from 0.00005 up to 200 mL/min per channel depending on the tubing and drive
- 6 rollers for reduced pulsation
- No cartridges needed: easily load your 2-stop tubing with no occlusion or retention adjustment
- Compatible with 2-stop microbore tubing from 0.19 to 2.79 mm ID
Content
1x Masterflex Multichannel pump head
Specifications
07534-04 | 07534-08 | |
Flow range | 0.00005 up to 200 mL/min | |
Number of rollers | 6 | |
Number of channels | 4 | 8 |
Max number of channels with stacked heads |
100-rpm drive: 32 600-rpm drive: 28 |
|
Max rpm | 600 | |
Compatible tubing | 2-stop microbore from 0.19 to 2.79 mm ID | |
Housing material | Anodized aluminum |
|
Rotor material | Stainless steel | |
Operating temperature | 0 to 40 °C (32 to 104 °F) | |
Weight | 1.8 kg (4 lb) | 2.3 kg (5 lb) |
Flow range & tubing
Multichannel pump heads for L/S tubing are only compatible with 2-stop microbore tubing.
Drive rpm | 0.19 mm ID | 0.25 mm ID | 0.89 mm ID | 1.42 mm ID | 2.06 mm ID | 2.79 mm ID |
1 to 100 | 0.0026 to 0.26 | 0.0053 to 0.53 | 0.054 to 5.4 | 0.12 to 12 | 0.23 to 23 | 0.35 to 35 |
6 to 600 |
Not recommended* | Not recommended* | 0.30 to 30 | 0.67 to 67 | 1.3 to 130 | 2.0 to 200 |
*Maximum recommended speed for these tubing sizes is 300 rpm
The Multichannel pump head for microbore tubing delivers low-pulsation synchronous flow from 0.00005 to 200 mL/min. Its robust construction in aluminum and stainless steel makes it durable and suitable for continuous-duty operation.
Stack multiple pump heads up to 32 channels on the same drive.
General
Masterflex Multichannel pump head
The Multichannel pump head offers low-pulsation synchronous multichannel pumping without cartridges. Its robust housing in anodized aluminum and stainless steel makes it the ideal head when reliability is needed for multichannel applications.
- Stackable pump heads up to 32 channels
- Flow rate from 0.00005 up to 200 mL/min per channel depending on the tubing and drive
- 6 rollers for reduced pulsation
- No cartridges needed: easily load your 2-stop tubing with no occlusion or retention adjustment
- Compatible with 2-stop microbore tubing from 0.19 to 2.79 mm ID
Content
1x Masterflex Multichannel pump head
Specifications
07534-04 | 07534-08 | |
Flow range | 0.00005 up to 200 mL/min | |
Number of rollers | 6 | |
Number of channels | 4 | 8 |
Max number of channels with stacked heads |
100-rpm drive: 32 600-rpm drive: 28 |
|
Max rpm | 600 | |
Compatible tubing | 2-stop microbore from 0.19 to 2.79 mm ID | |
Housing material | Anodized aluminum |
|
Rotor material | Stainless steel | |
Operating temperature | 0 to 40 °C (32 to 104 °F) | |
Weight | 1.8 kg (4 lb) | 2.3 kg (5 lb) |
Flow range & tubing
Multichannel pump heads for L/S tubing are only compatible with 2-stop microbore tubing.
Drive rpm | 0.19 mm ID | 0.25 mm ID | 0.89 mm ID | 1.42 mm ID | 2.06 mm ID | 2.79 mm ID |
1 to 100 | 0.0026 to 0.26 | 0.0053 to 0.53 | 0.054 to 5.4 | 0.12 to 12 | 0.23 to 23 | 0.35 to 35 |
6 to 600 |
Not recommended* | Not recommended* | 0.30 to 30 | 0.67 to 67 | 1.3 to 130 | 2.0 to 200 |
*Maximum recommended speed for these tubing sizes is 300 rpm