L100-1S Precision Peristaltic Pump
Rated 3.5/5 based on 11 customer reviews

L100-1S Precision Peristaltic Pump

The L100-1S pump series is designed for precise laboratory applications. Dispense your fluids with the highest accuracy: the pump includes a flow rate calibration function, and pumping speed can be controlled with a precise resolution of 0.01 rpm.
2 meters of silicone tubing included with each pump channel.
Available within 3 weeks
€724.00
The L100-1S pump series is designed for precise laboratory applications. Dispense your fluids with the highest accuracy: the pump includes a flow rate calibration function, and pumping speed can be controlled with a precise resolution of 0.01 rpm.
2 meters of silicone tubing included with each pump channel.

The L100-1S-2 peristaltic pump is designed for precise laboratory applications. With a resolution of 0.01 rpm at low pump speed (10 times more than standard pumps) and flow rate calibration feature, this pump delivers your fluids with the highest precision on a wide range of flow rates.

  • Designed for laboratory applications
  • High resolution: 0.01 rpm between 0.01 - 10 rpm ; 0.1 rpm between 10 - 100 rpm
  • 2 working modes: pump speed or flow rate
  • External control: analog or RS485
  • LCD display for flow rate and speed control
  • Calibration function
  • RS485 external control
  • Pump heads: DG 6 or 10 rollers, YZ1515X

Tip: More rollers mean less pulsatility at low flow rates: if you work below 5 mL/min, choose the 10-roller DG pump head to get the best accuracy and repeatability.

2 meters of silicone tubing included with each channel: 

  • DG pump head: 1*1 mm (1 mm ID x 3 mm OD), and 2*1 mm (2 mm ID x 4 mm OD)
  • YZ1515x pump head: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)

 

Pump head & Flow rate

DG (6 or 10 rollers)

Pump head with cassettes for low flow rate and multiple channels.

Tubing requirements: 3-stop tubing, wall thickness between 0.8 mm and 1 mm, inner diameter between 0.13 mm and 3.17 mm.

Tubing size (ID x Wall thickness)

Min. flow rate (0.1 rpm)

DG 6 rollers

Max. flow rate (100 rpm)

DG 6 rollers

Min. flow rate (0.1 rpm)

DG 10 rollers

Max. flow rate (100 rpm)

DG 10 rollers

0.5 mm x 0.8 mm 0.0002 mL/min 2.00 mL/min 0.00015 mL/min 1.50 mL/min
1 mm x 1 mm 0.0008 mL/min 8.00 mL/min 0.0006 mL/min 6.00 mL/min
2 mm x 1 mm 0.0028 mL/min 28.0 mL/min 0.0022 mL/min 22.0 mL/min
2.4 mm x 0.8 mm 0.0032 mL/min 32.0 mL/min 0.0024 mL/min 24.0 mL/min
3 mm x 1 mm 0.0048 mL/min 48.0 mL/min 0.0032 mL/min 32.0 mL/min

YZ1515X (6 rollers)

Pump head for higher flow rate, quick and easy tubing change without stopper.

Tubing requirements: standard tubing (no stoppers), wall thickness of 1.6 mm, only compatible with the sizes below.

 

Tubing size (ID x Wall thickness) Min. flow rate (0.1 rpm) Max. flow rate (100 rpm)
0.8 mm x 1.6 mm (13#) 0.0006 mL/min 6.30 mL/min
1.6 mm x 1.6 mm (14#) 0.0025 mL/min 25.0 mL/min
2.4 mm x 1.6 mm (19#) 0.0042 mL/min 41.66 mL/min
3.1 mm x 1.6 mm (16#) 0.0077 mL/min 76.66 mL/min
4.8 mm x 1.6 mm (25#) 0.0160 mL/min 160.0 mL/min
6.4 mm x 1.6 mm (17#) 0.0267 mL/min 266.0 mL/min
7.9 mm x 1.6 mm (18#) 0.0367 mL/min 366.0 mL/min
Speed  0.01 rpm-100rpm, CW/CCW
Speed resolution

0.01 rpm between 0.01 and 10 rpm

0.1 rpm between 10 and 100 rpm

Display LCD
Control modes Keypad control, external signal control and communication control
Working modes
  • Speed control mode
  • Flow rate mode: the pump runs continuously at the set flow rate
Flow rate calibration Improves the flow rate accuracy
Flow rate settings range

0.01 µL/min to 999 L/min

Select the flow rate unit among µL/min, mL/min and L/min.

External control
  • Start/stop control (switch signal)
  • Direction control (switch signal)
  • Speed control: 0-5V, 0-10V, 4-20 mA, 0-10 kHz through the external control module
Communication protocol

RS485 interface, Longer or Modbus protocol.

The communication parameters (address, baud rate, parity, stop bit) can be set through the pump keypad.

Timing function

Set the running time (13 options), the pump stops automatically after the desired operating time.

Parameters & settings

Operating parameters are saved automatically.

When powered up, the pump parameters will resume to the parameters before switch off.

Prime Fast filling or emptying at full speed
Keypad lock function Keypad can be locked to prevent misoperation. The time before locking can be changed.
Dimensions (L x W x H) 232 x 142 x 149 mm
Power supply AC 100V-240V (25W), 50/60Hz
Operating temperature 0 - 40 °C
Relative humidity < 80%
IP rating IP31
Weight 2.38 kg

More information in the brochure.

Payment Terms

You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

Credit card 

  • Add your products to the cart
  • In the cart page, click on Proceed to Checkout
  • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
  • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

Invoice

  • Add your products to the cart
  • In the website header, click on Request a Quote
  • Fill in the required informations, then click on Submit Quote
  • Our team will send you a quote shortly
  • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
  • Our team will complete your purchase and send you the invoice!

If you wish to pay in USD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

 

Worldwide shipping

We ship worldwide from our warehouse in France.

The shipping charges are calculated based on the weight of the package and the country of destination: you can estimate the shipping cost on the cart page. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination! 

Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)