-
Add to Cart The item has been added PreSens
Optical Carbon Dioxide Sensor - CO2 SensorPlug (pack of 10)The CO2 SensorPlug has been specifically designed for non-invasive measurement of partial pressure of carbon dioxide in liquids, in millifluidic and microfluidic applications. With a Mini Luer interface, it can be easily integrated into microfluidic...337.50€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Flat-Bottom Plugs (pack of 5)These 10-32 flat-bottom plugs made in Delrin acetal are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 5 units. General This plug with a 10-32 flat-bottom thread port configuration is useful to close off unused...81.90€ -
Choose Options Masterflex
Silicone (peroxide-cured) Extension Tubing (50 ft / 15.2 m)Silicone (peroxide-cured) tubing is designed for optimal strength and physical compression in a wide variety of industrial uses. Thanks to its biocompatibility and lack of additives, plasticizers, or DOP, it is odorless and non-toxic, with no taste...172.00€ -
Add to Cart The item has been added Memetis
Memetis ECU-S Electric Control UnitMemetis ECU-S is a simple control unit for quick evaluation of Memetis valves. General The Memetis ECU-S is the simplest controller for controlling one 2/2 NC Memetis valve. Features For one valve Easy to switch from ON to OFF status via...70.00€ -
Choose Options New Era Pump Systems
NE-8000 SyringeONE:200 High Pressure Programmable Syringe PumpThe NE-8000 SyringeONE:200 is a single-channel programmable syringe pump for high pressures. In this version, the SyringeONE:200 can generate flow rates up to 340.6 mL/min, and delivers the highest forces of all New Era pumps. The SyringeONE:200 pump is...2,165.30€ -
Add to Cart The item has been added Little Things Factory
RS T Baffle Mixer - Glass ChipThis RS T baffle micromixer is designed for the easy and high throughput generation of nanoparticles or for the efficient mixing of up to 3 solutions. Made of glass, it comes with its 1/4-28 connection bar. General The RS T micromixer is a...977.50€ -
Add to Cart The item has been added Micronit
Teflon Plugs for Fluidic Connect Pro Chip Holder (pack of 10)A set of 10 PTFE plugs to block any inlet/outlet. For use in combination with the Fluidic Connect Pro chip holder and 1/16" OD tubing. General These Teflon plugs block the flow from or to channel inlets/outlets of the Fluidic Connect Pro chip holder. The...45.00€ -
Choose Options Masterflex
L/S 2-Stop Chem-Durance Bio Pump TubingA set of 2-stop tubing for Masterflex L/S pump heads. Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting 2-stop L/S...163.00€ - 198.00€ -
Choose Options Longer
L300-1F Intelligent Peristaltic PumpThis precise peristaltic pump covers a wide range of laboratory applications up to 1200 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment. Various pump heads are available from 1 up to 8...2,341.70€ - 2,585.10€ -
Choose Options SynVivo
SynTox 3D Toxicology ModelSynTox is a new 3D toxicology model, modeling a histological tissue slice under dynamic conditions. While other in vitro models fail to reproduce physiological features like morphological size or physiological blood flow, SynTox has proven its efficacy...2,046.70€ -
Choose Options Masterflex
Tygon E-Lab (E-3603) Extension Tubing (100 ft / 30.4 m)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth, non-aging and non-oxidizing inner bore prevents build-up of...192.00€ - 196.00€ -
Add to Cart The item has been added Sensirion
LG16 Connectivity Kit for 6-40 PortsSensirion LG16 Connectivity Kit for 6-40 coned fluidic ports. General The connectivity kit includes fluidic connectors for attaching tubing to the sensor and a ribbon cable for establishing electrical connections. Designed for sensors with UNF 6-40 coned...62.50€ -
Add to Cart The item has been added BFlow
Stopper connectorThis connector allows an ideal and tight connection between a silicone tube (1 mm ID) and a tube (2.7 mm OD) with stoppers of a peristaltic pump. General With this connector, it is easy to interface silicone tubing coming from your BFlow microfluidic...50.00€ -
Choose Options Masterflex
2-Stop Puri-Clear LL Pump Tubing (pack of 12)Puri-Clear® LL tubing offers excellent chemical resistance, optical clarity for easy fluid identification, and a high elastic memory material for efficient handling of viscous materials. It has a low gas permeability, a smooth inner bore, a high...46.10€ -
Choose Options Masterflex
2-Stop Versilon 2001 Pump Tubing (pack of 6)Versilon™ 2001 tubing has the best chemical resistance of any Tygon® formulation, making it suitable for many polar solvents. It doesn't contain plasticizers, and its clear nature allows for easy flow monitoring. Its low extractability and gas...125.00€ -
Choose Options HNP Mikrosysteme
mzr-2521 Micro Annular Gear Pumpmzr-2521 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 0.15 to 9 mL/min (minimum dispensing of 0.25 µL). It combines the advantages of peristaltic and syringe pumps: near pulsation-free, and easy fluids...985.30€ - 1,356.60€ -
Choose Options Advanced Microfluidics
RVM - OEM Switch Microfluidic Rotary ValveThe RVM microfluidics rotary Switch valve is a precise OEM low-pressure electric rotary valve designed for automated microfluidic applications. The RVM microfluidics rotary valve series, renowned for its small channels and ultra-precise positioning...842.30€ - 901.90€ -
Add to Cart The item has been added Bartels Mikrotechnik
Solenoid 3/2 Burkert Active Valve for Bartels MultiboardA compact solenoid valve from Bürkert, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverB). General This high-performance 3/2-way solenoid 6724 valve from Bürkert with media separation handles both liquids and gases...150.00€ -
Choose Options Bürkert
3/2 Way Bistable Whisper Valve Type 6724Bürkert Whisper valve 6724 3/2 way bistable combines high chemical resistance, very fast and silent switching (3 ms at 30 dB(A)) and high back pressure tightness in a compact design of only 8.9 mm width. This valve is either available with a...115.00€ - 159.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Headless PPS Fittings + ETFE Ferrules 1/4-28 to 1/16" OD (pack of 10)This convenient headless 1/4-28 fitting for 1/16" OD tubing is made of a PPS nut and an ETFE ferrule to ensure its high chemical resistance. Sold in packs of 10 fittings. General A set of PPS fittings with ETFE ferrules to interface any 1/16" OD rigid...96.80€ -
Choose Options Sensirion
Molex Cables for Sensirion SLF3x SensorsThese Molex cables allow you to connect Sensirion SLF3x sensors either to Sensirion SCC1 cables or to your custom setup. The Molex-to-M8 cable is designed for connecting SLF3x-series sensors to SCC1 cables, while the Molex-to-pigtail version enables...20.00€ - 38.00€ -
Add to Cart The item has been added Sensirion
SLF3S-4000B Flow Sensor Evaluation KitThe SLF3S-4000B Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-4000B sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Add to Cart The item has been added Eden Tech
Sublym Hot Embossing Machine for ThermoplasticsDiscover this user friendly and compact system for thermoplastic molding! The Sublym is a great alternative to PDMS-soft lithography for microfluidic devices. It will dramatically ease your work when fabricating microfluidic chips: Sublym simplifies the...4,235.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect Pro PEEK Connection KitA kit containing 5x ferrules for 1/16" OD tubing and 5m PEEK tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...205.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
