-
Add to Cart The item has been added ELVEFLOW
Microfluidic Luer Lock Check Valve (pack of 10)One-way check valve with low cracking pressure (20 mbar) to prevent backflow and for recirculation setups. General A check valve for recirculation setup or protection of your equipment, for use in...54.00€ -
Add to Cart The item has been added BFlow
Y Connector Barbed BFlow (pack of 5)This Y connector is compatible with BFlow's chips for easy connection of different flexible tubes. These connectors are available in packs of 5. General These Y connectors can be used to link...50.00€ -
Add to Cart The item has been added ELVEFLOW
MUX Distribution Microfluidic ValveThe MUX Distributor is the perfect solution to automate the sequential injection of reagents during a microfluidic experiment. Switch between up to 12 liquids quickly and easily and create automated...3,400.00€ -
Choose Options Longer
L100-1S-2 Precision Peristaltic PumpThe L100-1S-2 pump series is designed for precise laboratory applications from less than 1 µL/min up to 366.7 mL/min. Dispense your fluids with the highest accuracy: the pump includes a flow rate...984.00€ - 1,227.40€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Flat-Bottom Union Adapters (pack of 5)VacuTight 10-32 flat-bottom union adapter manufactured in PEEK to connect two 10-32 flat-bottom fittings. Sold by pack of 5 units. General The 10-32 flat-bottom VacuTight union efficiently connects...99.10€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 360 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 360 µm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to...34.80€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings + Ferrules (pack of 10)This 10-32 fittings connection kit for 1/16" OD tubing is made of biocompatible PEEK. It is designed so that the nut and ferrule create a dual compression: the forward cone on the ferrule provides...89.30€ -
Choose Options Darwin Microfluidics
PFA Tubing (20 m)PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of...111.30€ - 160.20€ -
Choose Options Sensirion
SCC1 Connection Cable for Sensirion SensorsConnect your standalone Sensirion sensor (SLQ, SLI, SLS, SLG) to your computer or any integrated system. This cable has an M8 end to connect your sensor, and USB or pigtail. General The SCC1 cable...78.90€ - 114.60€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 VacuTight Fitting for 1/8” OD (pack of 10)VacuTight 1/4-28 fittings to maintain 1/8" OD tubing under vacuum and low pressure. Sold by packs of 10 units. General These VacuTight fittings strongly hold 1/8" OD rigid tubing to 1/4-28 female...73.60€ -
Choose Options Longer
G100-1L Peristaltic Pump for IncubatorThe new G100-1L peristaltic pump is an update of the well-known G100-2J. It is still compatible with working directly in the incubator to be as close as possible to your sample or microfluidic chip...1,100.60€ - 1,344.00€ -
Choose Options Harvard Apparatus
Harvard Apparatus 11 Elite Programmable Syringe PumpThe Harvard Apparatus 11 Elite syringe pump is a precise and versatile pump for general use in microfluidics. This pump delivers a smooth flow from 1.28 pL/min to 88.28 mL/min, at an accuracy of ± 0...2,300.00€ - 3,786.00€ -
Choose Options Innofluid
HPM100 Low Flow Rate Peristaltic Pump for IncubatorThe new HPM100 peristaltic pump was designed to operate seamlessly at low flow rates within an incubator, allowing it to be positioned in close proximity to your sample or microfluidic chip. This...2,244.00€ - 2,695.50€ -
Choose Options HNP Mikrosysteme
mzr-2521X1 Micro Annular Gear Pump with Controllermzr-2521X1 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 15 µL/min to 9 mL/min (minimum dispensing of 0.25 µL). The integrated motion...2,146.10€ - 2,500.10€ -
Choose Options microfluidic ChipShop
Droplet Generator - Various designs on one chip Fluidic 285The Fluidic 285 Droplet Generator Chip by Microfluidic ChipShop, made in polycarbonate (PC) or COC, enables reliable and precise generation of droplets with varying volumes. Mini Luer connections...42.20€ - 45.20€ -
Choose Options IDEX Health & Science
Flangeless Frit-in-a-Ferrule Filter (pack of 2)This Frit-in-a-Ferrule offers a unique design that seals and filters simultaneously by incorporating a frit into the body of a flat-bottom ferrule for 1/16" or 1/8" OD tubing. This resilient PCTFE...25.80€ - 31.40€ -
Choose Options DK Infusetek
SPM/ZU-I Independent Syringe Pump (1-8 channels)High-precision split type syringe pump with one controller and separate syringe pumps (up to 8 units) for various lab applications from 0.01 µL/min to 127 mL/min. Embedding a 4.3" color LCD touch...1,758.50€ - 8,758.50€ -
Choose Options Micronit
Focused Flow Droplet Generator - sideconnect (pack of 3)A pack of 3 focused flow (or flow focusing) droplet generators in glass with sideconnect interface to be used with the Sideconnect chip holder. Available uncoated (hydrophilic) or with a hydrophobic...355.00€ - 465.00€ -
Choose Options DK Infusetek
ISPLab Touch Screen Syringe Pump (1 - 12 channels)Work easily and with the best accuracy thanks to the infusion/withdrawal ISPLab syringe pump! Its large LCD touch screen is really convenient to control the pump during your microfluidics experiments...1,221.20€ - 2,162.80€ -
Choose Options IDEX Health & Science
Barbed to 10-32 Male Adapter (pack of 10)Easily connect soft-walled 1/16", 1/8" or 3/16" ID tubing to 10-32 threaded ports using these adapters. Available for coned or flat-bottom ports, they come in a pack of 10 units. General Thread...58.20€ - 228.30€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Male 10-32 Coned Adapters (pack of 5)Create a quick connection between different threads with this female luer to male 10-32 coned adapter, manufactured from natural ETFE. Sold by pack of 5 units. General Female Luer to male 10-32 coned...30.30€ -
Choose Options Masterflex
3-Stop Chem-Durance Bio Pump Tubing (pack of 6)Chem-Durance® Bio tubing was designed specifically for advanced pumping systems, providing excellent chemical resistance and long operating life. Its low spallation rate ensures seamless pumping,...157.00€ - 166.00€ -
Choose Options New Era Pump Systems
OEM Network KitA kit for New Era OEM pumps, including a power supply and a secondary cable for pump-to-pump connection. This kit should be used when networking two or more OEM syringe pumps to a single computer...12.80€ -
Choose Options IDEX Health & Science
Micro-Splitter ValveThe Micro-Splitter Valve made in PEEK has a 1/4-28 Flat-Bottom thread configuration. Included fittings accept 1/16" OD tubing. This assembly comes with 3x 1/4-28 Flangeless fittings (P-235)...131.20€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
