-
Choose Options Longer
BT100-3J Basic Peristaltic PumpA laboratory peristaltic pump to cover a wide range of applications, from 2 µL/min to 366.7 mL/min. This is the updated version of the BT100-2J. You can choose between two pump head types depending on the required flow rate. Silicone tubing...723.40€ - 966.90€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic High Pressure Reservoir 350 mLA large 350 mL pressure-proofed reservoir for high-pressure microfluidic applications up to 8 bar. Manufactured in PTFE, the cap ensures a secured connection between the glass bottle and your microfluidic downstream system with the usual 1/4-28...599.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-damper for Bartels MicropumpsThe mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to reduce the flow pulsations from the Bartels BP7 and mp6...28.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver Pump DriverBartels mp-Highdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard...72.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Multiboard2 Evaluation BoardThe mp-Multiboard2 evaluation board is the new version of the mp-Multiboard. Easily control your whole setup from the Multiboard2: up to six BP7 or mp6 Bartels micropumps, flow sensors, pressure sensors, valves, etc. The user-friendly Multiboard Windows...299.00€ -
Choose Options ELVEFLOW
Microfluidic Reservoir Holder for Eppendorf and Falcon TubesA versatile and autoclavable rack to hold up to 4 independent tubes: 1.5 mL Eppendorf (XS), 15 mL Falcon (S), 50 mL Falcon (M). This holder allows a convenient and sturdy setup with microfluidic systems using standard 1/4-28 fittings interfaced with any...599.00€ - 699.00€ -
Choose Options Memetis
Normally Closed 2/2 MicrovalvesMemetis Normally Closed microvalves are designed for microfluidics: ultra-compact (total footprint of 20 mm) with an internal volume of less than 6.5 µL, they can easily be integrated into your lab-on-chip. The valves are either controllable with your...99.00€ -
Choose Options Masterflex
L/S Easy-Load II Pump HeadThe Easy-Load II pump head is an upgraded version of the standard Easy-Load pump head. It can reach higher flow rates and offers both open-head sensor and adjustable occlusion options. Up to 4 pump heads can be stacked on one compatible pump drive. Flow...520.00€ - 824.00€ -
Choose Options Innofluid
LabV1 Intelligent Low Flow Rate Peristaltic PumpFlow rate peristaltic pump with 4.3" LCD touch screen with dispensing and fixed volume modes. Made in laboratory-grade ABS, this pump is easy to use and can reach flow rates down to a few µL/min at a very competitive price! Available with the new...1,104.20€ - 1,737.00€ -
Choose Options New Era Pump Systems
NE-1010 SyringeONE:100 High Pressure Programmable Syringe PumpThe NE-1010 SyringeONE:100 is a single-channel programmable syringe pump for a wide range of applications. In this High-Pressure version, the SyringeONE:100 has a stronger motor than the standard SyringeONE, which can generate flow...1,004.30€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-hc Hose Clamps for Bartels Micropumps (pack of 10)Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted disconnection or leakages between the pump and the tubing...21.00€ -
Choose Options New Era Pump Systems
NE-1600 SyringeSIX Programmable Multichannel Syringe PumpThe NE-1600 SyringeSIX is a 6-channel syringe pump designed for a wide range of applications: programmable standalone or through a computer, the SyringeSIX can hold multiple syringes to generate flow rates from 7.53 nL/min up to 19.38 mL/min. General The...1,704.60€ -
Choose Options Masterflex
L/S Easy-Load Mounting Hardware SetEasily stack multiple Easy-Load or Standard pump heads on your Masterflex L/S drive. General Mounting hardware for Masterflex L/S Easy-Load or Standard pump heads. Manufactured in stainless steel, it allows to replace your existing screws or stack...59.20€ - 140.00€ -
Choose Options New Era Pump Systems
New Era Syringe Heater KitHeat your syringes and control their temperature up to 185 °C! This kit includes a control unit and a primary syringe heater pad to heat one syringe. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General A...433.20€ -
Choose Options New Era Pump Systems
SyringeONE OEM Syringe PumpThe OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options available for low flow rates or high pressure, with...564.60€ - 1,221.40€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Driver Pump DriverBartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2...67.00€ -
Choose Options ISMATEC
Reglo ICC (Independent Channel Control) PumpControl independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and calibrate. The independent channel calibration ensures high...3,450.00€ - 5,570.00€ -
Choose Options New Era Pump Systems
Pump-to-pump Network Cable for New Era PumpsPump-to-pump cable for daisy-chaining of New Era pumps. General Daisy-chain two or more New Era pumps to connect your pump network to a single computer. Available in 7 ft. (2.13 m) and 25 ft. (7.62 m) length cable. Note: the first device should be...3.30€ - 7.60€ -
Choose Options Longer
G100-1L Peristaltic Pump for IncubatorThe new G100-1L peristaltic pump is an update of the well-known G100-2J. It is still compatible with working directly in the incubator to be as close as possible to your sample or microfluidic chip. It has been improved with a better IP rating of IP66...1,100.60€ - 1,344.00€ -
Choose Options HNP Mikrosysteme
mzr-2521X1 Micro Annular Gear Pump with Controllermzr-2521X1 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 15 µL/min to 9 mL/min (minimum dispensing of 0.25 µL). The integrated motion controller allows to precisely control the pump and program complex...1,912.00€ - 2,226.20€ -
Choose Options Masterflex
L/S Easy-Load Pump HeadThe newly designed Easy-Load pump head automatically retains tubing and allows fast tubing changes. It is suitable for different sizes of L/S tubing. Up to 4 pump heads can be stacked on one compatible pump drive for multichannel applications. Flow range...564.00€ - 652.00€ -
Add to Cart The item has been added ELVEFLOW
MUX Distribution Microfluidic ValveThe MUX Distributor is the perfect solution to automate the sequential injection of reagents during a microfluidic experiment. Switch between up to 12 liquids quickly and easily and create automated sequences thanks to its software integration...3,400.00€ -
Choose Options ELVEFLOW
Pneumatic Polyurethane (PU) Flexible TubingSpare pneumatic tubing for your Pressure Controller air supply. Available in 4 mm or 6 mm OD. General Connect your pressure source to your Pressure Controller. Content (5 m) 4 mm OD Pneumatic Tube or (5 m) 6 mm OD Pneumatic...39.00€ - 59.00€ -
Choose Options Masterflex
L/S Economy Modular Peristaltic Pump DriveThe L/S® Economy Modular Drive enables convenient placement, the motor and the controller of this digital peristaltic pump drive being separated. 4 to 100 rpm and 20 to 600 rpm versions are available. General Masterflex L/S Economy Modular Drive The...1,610.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
