L100-1S-2 Precision Peristaltic Pump
Rated 3.5/5 based on 11 customer reviews

L100-1S-2 Precision Peristaltic Pump

The L100-1S-2 pump series is designed for precise laboratory applications from less than 1 µL/min up to 366.7 mL/min. Dispense your fluids with the highest accuracy: the pump includes a flow rate calibration function, and the pumping speed can be controlled with a precise resolution of 0.01 rpm.
2 meters of silicone tubing are included with each pump channel.
Available immediately
€947.10
The L100-1S-2 pump series is designed for precise laboratory applications from less than 1 µL/min up to 366.7 mL/min. Dispense your fluids with the highest accuracy: the pump includes a flow rate calibration function, and the pumping speed can be controlled with a precise resolution of 0.01 rpm.
2 meters of silicone tubing are included with each pump channel.

The L100-1S-2 peristaltic pump is designed for precise laboratory applications. With a resolution of 0.01 rpm at low pump speed (10 times more than standard pumps) and flow rate calibration feature, this pump delivers your fluids with the highest precision on a wide range of flow rates.

  • Designed for low-flow laboratory applications, from < 1 µL/min up to 366.7 mL/min
  • High resolution: 0.01 rpm between 0.01 - 10 rpm ; 0.1 rpm between 10 - 100 rpm
  • 2 working modes: pump speed or flow rate
  • External control: analog or RS485
  • LCD display for flow rate and speed control
  • Calibration function
  • RS485 external control

Tip: More rollers mean less pulsatility at low flow rates: if you work below 5 mL/min, choose the 10-roller DG pump head to get the best accuracy and repeatability.

Silicone tubing included with each channel:

  • DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
  • YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
  • FG15-13: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • FG25-13: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
  • DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD)

 

Pump head Materials Compatible tubing type Number of rollers Flow range (0.01-100 rpm)

DG-A (6 rollers)

0.00025-48 mL/min

Up to 8 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

6

0.5*0.8: 0.00025-2 mL/min

1*1: 0.0008-8 mL/min

2*1: 0.0028-28 mL/min

2.4*0.8: 0.0032-32 mL/min

3*1: 0.0048-48 mL/min

DG-B (10 rollers)

0.0002-32 mL/min

Up to 4 channels

Not stackable

 

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

 

10

0.5*0.8: 0.0002-1.5 mL/min

1*1: 0.0006-6 mL/min

2*1: 0.0022-22 mL/min

2.4*0.8: 0.0024-24 mL/min

3*1: 0.0032-32 mL/min

YZ1515X-A / YZII15

0.0006-366.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

3

13# (0.8 mm ID): 0.0006-6.3 mL/min

14# (1.6 mm ID): 0.0025-25 mL/min

19# (2.4 mm ID): 0.0042-41.7 mL/min

16# (3.2 mm ID): 0.0077-76.7 mL/min

25# (4.8 mm ID): 0.016-160 mL/min

17# (6.4 mm ID): 0.026-266.7 mL/min

18# (7.9 mm ID): 0.036-366.7 mL/min

YZ1515X-B

0.0006-244.3 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

6

13# (0.8 mm ID): 0.0006-4.2 mL/min

14# (1.6 mm ID): 0.0025-16.7 mL/min

19# (2.4 mm ID): 0.0042-27.8 mL/min

16# (3.2 mm ID): 0.0077-51.1 mL/min

25# (4.8 mm ID): 0.016-106.7 mL/min

17# (6.4 mm ID): 0.026-177.6 mL/min

18# (7.9 mm ID): 0.036-244.3 mL/min

YZ2515X / YZII25

0.016-266.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

3

15# (4.8 mm ID): 0.016-160 mL/min

24# (6.4 mm ID): 0.026-266.7 mL/min 

DG15-24

0.009-300 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers

Tubing sizes: 16#, 25#, 17#

4

16# (3.2 mm ID): 0.009-90 mL/min

25# (4.8 mm ID): 0.024-183.3 mL/min

17# (6.4 mm ID): 0.04-300 mL/min

DG15-28

0.003-46 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers, addition of slip-on tubing stops required

Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

 

8

ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min

0.5*0.8: 0.003-3.2 mL/min

1*1: 0.013-10 mL/min

2*1: 0.03-46 mL/min

2.4*0.8: 0.05-46 mL/min

13# (0.8 mm ID): 0.007-3.8 mL/min

14# (1.6 mm ID): 0.027-18 mL/min

FG15-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

3 ≤ 400 mL/min

FG25-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

3 ≤ 366.7 mL/min

1x L100-1S-2 peristaltic pump drive

1x Pump head

1x Power supply

With the DG pump head, for each channel:

  • 1x 1m of 3-stop 1*1 mm tubing
  • 1x 1m of 3-stop 2*1 mm tubing

With the YZ1515X or YZII15 pump head:

  • 1x 2m of 16# peristaltic tubing
  • 1x 2m of 25# peristaltic tubing

With the YZ2515X or YZII25 pump head:

  • 1x 2m of 15# peristaltic tubing
  • 1x 2m of 24# peristaltic tubing

With the DG15-24 pump head:

  • 1x 2m of 16# peristaltic tubing
  • 1x 2m of 25# peristaltic tubing

With the DG15-28 pump head:

  • 1x 2m of 13# peristaltic tubing
  • 1x 2m of 14# peristaltic tubing
  • O-rings/Slip-on tubing stops


    Speed (rpm) 0.01 - 100, CW/CCW
    Speed resolution

    0.01 rpm between 0.01 and 10 rpm

    0.1 rpm between 10 and 100 rpm

    Display LCD
    Control modes Keypad control, external signal control and communication control
    Working modes
    • Speed control mode
    • Flow rate mode: the pump runs continuously at the set flow rate
    Flow rate calibration Improves the flow rate accuracy
    Flow rate settings range

    0.01 µL/min to 999 L/min

    Select the flow rate unit among µL/min, mL/min and L/min.

    External control
    • Start/stop control (switch signal)
    • Direction control (switch signal)
    • Speed control: 0-5V, 0-10V, 4-20 mA, 0-10 kHz through the included external control module
    Communication protocol

    RS485 interface, Longer or Modbus protocol.

    The communication parameters (address, baud rate, parity, stop bit) can be set through the pump keypad.

    Timing function

    Set the running time (13 options), the pump stops automatically after the desired operating time.

    Parameters & settings

    Operating parameters are saved automatically.

    When powered up, the pump parameters will resume to the parameters before switch off.

    Prime Fast filling or emptying at full speed
    Keypad lock function Keypad can be locked to prevent misoperation. The time before locking can be changed.
    Dimensions (L x W x H) 232 x 142 x 149 mm
    Power supply AC 100V-240V (25W), 50/60Hz
    Operating temperature 0 - 40 °C
    Relative humidity < 80%
    IP rating IP31
    Weight 2.38 kg

     

    Pump head compatibility
    Pump head Number of channels Max. stacked pump heads on one drive Tubing compatibility
    YZ1515X 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    YZ2515X 1 1 15#, 24#
    YZII15 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    YZII25 1 1 15#, 24#
    DG Up to 8 1

    3-stop tubing

    ID ≤ 3.17 mm, wall thickness 0.8-1 mm

    DG15-24 2 1 16#, 25#, 17#
    DG15-28 2 1

    Standard tubing with slip-on tubing stops

    ID ≤ 3.17 mm, wall thickness 0.8-1 mm

    FG15-13 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    FG25-13 1 1 15#, 24#

    DMD15-13-B

    DMD15-13-D

    1 1 13#, 14#, 19#, 16#, 25#

    BZ15-13

    BZ25-13

    1 1 14#, 16#, 25#, 17#, 24#

    Payment Terms

    You can either order and pay via credit card or invoice (through a purchase order). Request a quote easily by clicking on the "Request a Quote" button in the cart page.

    Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

    Credit card 

    • Add your products to the cart
    • In the cart page, click on Proceed to Checkout
    • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
    • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

    Invoice

    • Add your products to the cart
    • In the website header, click on Request a Quote
    • Fill in the required informations, then click on Submit Quote
    • Our team will send you a quote shortly
    • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
    • Our team will complete your purchase and send you the invoice!

     

    If you wish to pay in USD, GBP or AUD, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

     

    Worldwide shipping

    We ship worldwide from our warehouse in France.

    Shipping charges are calculated based on the shipping country, and can be estimated from the cart page. Our shipping rates and times are:

    • France: GLS (1-2 business days), free shipping above 350€
    • Germany, Austria, Belgium, Denmark, Spain, Hungary, Italy, Luxembourg, Netherlands, Poland, Portugal, Czechia, Slovakia:
      • GLS (2-4 business days), free shipping above 350€
      • DHL Express (1-2 business days), reduced rate above 350€
    • Bulgaria, Croatia, Estonia, Finland, Ireland, Latvia, Lithuania, Romania, Slovenia, Sweden, Greece, Cyprus, Malta: DHL Express (1-2 business days), free shipping above 400€
    • United Kingdom: DHL Express (1-2 business days), free shipping above 400€
    • USA, Canada: DHL Express (1-3 business days), free shipping above 400€
    • Switzerland: DHL Express (1-2 days), free shipping above 450€
    • Other countries: DHL Express, shipping rates based on the destination, weight and dimensions

     

    If you wish to use your own shipping account, we will charge a flat fee of 15€.

    We reserve the right to apply a surcharge for parcels > 30 kg, palletized shipments, or packages with dimensions exceeding the maximum dimensions of our carriers.

    Please note that our standard shipping incoterms are DAP (Delivered At Place), or EXW if using your own carrier.

    Contact us if you have any questions!

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)