The mp-Multiboard2 evaluation board is the new version of the mp-Multiboard.

Easily control your whole setup from the Multiboard2: up to six Bartels micropumps, flow sensors, pressure sensors, valves, etc. The user-friendly Multiboard Windows app makes it easy to control the parameters of each component.

It is compatible with the mp-Lowdriver, mp-Driver, mp-Highdriver and mp-Highdriver4 (see description below).

General

Take control of the Bartels environment... without a single line of code!

The Multiboard2 is designed to offer the highest versatility for Bartels micropumps and accessories. Based on a new Arduino controller, it interfaces with the following:

• up to six Bartels micropumps
• up to two Takasago SMV-2R-BN1F or Memetis BV1101 valves (the mp-valvedriver must be used)
• one Honeywell ABP series 15 psi pressure sensor
• up to three analog sensors (e.g. Optek OPB350L250 liquid level sensor)
• ... and more to come!

The mp-Multiboard is pre-programmed with an easy-to-use Windows application to control and monitor all these components easily. 

A pump driver (sold separately) is required to control any Bartels micropump from the Multiboard2. The Multiboard2 can control up to 3 drivers at the same time: Highdriver4, Lowdriver or Highdriver (only one at a time), and Driver.

Choose your pump driver:

Find more information and documentation here.

Content

1x Multiboard2 control board (without driver)

1x USB-C cable

Documentation

Click here to find all the datasheets, application notes, softwares and manuals for Bartels products